Surrey · England
Bath chip & crack repair in Tongham, Surrey
Bath repair in Tongham without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips caused by builders
Where we work around Tongham
Tongham is about 1 mile south-east of Aldershot, in Surrey. Jobs in Tongham are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in all 395 towns and villages across Surrey, from the larger towns to small villages. Our jobs stretch from Tongham to London (about 33 miles away).
Our technicians cover all of the GU10 postcode area and the streets around it. That includes homes on The Street, Chester Way and Lambourne Way and the roads around them. Neighbouring places we cover include Sandy Cross (1 mile south), Ash (1 mile north-east), Seale (1 mile south-east), Ash Green (1 mile north-east) and Badshot Lea (1 mile west). Within a short drive, we also cover Guildford (7 miles east), Woking (9 miles north-east), Camberley (7 miles north), Farnham (3 miles south-west), Frimley (6 miles north) and Haslemere (10 miles south).
Around Tongham
In Tongham, that means homes near Church of St Paul, The Connaught School and St Paul's CofE Infant School & Nursery and the streets around them. Also close by are The White Hart pub (under half a mile south-east), Ash Manor School (0.5 miles north) and Aldershot Park (less than half a mile west). For rail, the closest station is Ash station, roughly 1.4 miles north-east of the centre. Well-known places in the area include Ash Museum (1.3 miles north-east) and Farnham Castle (3.2 miles west). For a walk, there is Aunt's Pool and Hog's Back.
- Other local spots include Seale and Tongham (1 mile south)
About our bath repair in Tongham
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We regularly repair pressed steel enamel, cast iron enamel and roll-top & freestanding, and people most often call us about a hole punched through by something heavy and an old repair that has yellowed or come loose.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Tongham (GU10)
- County
- Surrey
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Repairs from £95. We give every job a fixed quote from photos. This is what makes a difference:
- What the surface is made of
- Any earlier repairs that need removing first
- Access to the area
- How much damage there is
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- The postcode, so we can plan the visit
- Details of any past repairs
- The material, if you know it
- Daylight if possible, and no flash reflection
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed quote, not an estimate.
Nearby places to Tongham
More services for Tongham
FAQs for Tongham
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Is it worth repairing rather than replacing?
Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Keeping it looking good
Most damage we see is avoidable. These habits help:
- Protect the bath with a towel when doing jobs nearby
- Get a dripping tap fixed promptly
- Keep metal cans and razors off the surface
- Rinse the bath after use, especially in hard water areas
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you’re happy with the plan. It usually takes a few hours, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the day after.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
How to get a price
To get a price, send a couple of pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.
Read more
Honest limits
In fairness, some problems need a different fix:
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
Send us photos and we’ll tell you honestly before you book.
What we work on
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
When to call us in Tongham
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.
Look out for these signs:
- A chipped rim or side
- Rust spots around the plughole
- Scuffs and scratches in the surface
- A failed DIY repair that is discoloured or lifting
Before booking anyone
- What happens if they find more damage
- Whether they match the colour on site
- How the room is protected while they work
- A fixed quote, and whether VAT is included
Should you replace it?
Many people think a damaged bath means a new one. Generally it doesn’t: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Tongham customers choose us
- We come to you, anywhere in the UK
- Colour-matched on site
- We leave the room as we found it
- Honest advice, even when it means no job
Read our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
