Greater London · England

Bath chip & crack repair in Ashburton, Greater London

Fixed-price bath repair in Ashburton and the surrounding area, done in a single visit in most cases.

  • Repairs from £95
  • A chipped rim or side
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Ashburton?

Bath repair at your home in Ashburton

We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. We work on whirlpool & spa baths, pressed steel enamel and acrylic, and common reasons people get in touch are cracks in an acrylic bath and deep scratches in acrylic.

We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.

Where
Ashburton (CR0, SE25, CR9)
Region
Greater London
Warranty
12 months on all our work
Quote
From £95. Free and fixed, from your pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

How we price bath repair

Repairs from £95. Each job gets its own fixed price. This is what makes a difference:

  • What kind of damage it is
  • The material and finish
  • Any earlier repairs that need removing first
  • Whether we combine several jobs

What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.

Quotes from your photos

When you take your photos, a few simple things make all the difference:

  • Your postcode, so we can check dates
  • Details of any past repairs
  • A coin or ruler next to the damage for scale
  • A wider photo showing the entire bath

The quickest way to a price is to send two or three photos using our quote form or call us. We’ll tell you honestly if a repair is the right fix.

What we can’t put right

Not everything can be repaired, and we will tell you before we start. Repairs won’t solve:

  • Acrylic cracks with no access behind them
  • Leaking fittings, which need a plumber
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

Not sure? Send pictures and we’ll give you a straight answer before booking.

What we work on

  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Cast iron enamel
  • Pressed steel enamel

About Ashburton

Ashburton is about 6 miles south of New Cross, in Greater London. Clients in Ashburton get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Ashburton is one of 764 places in Greater London we cover. Our jobs stretch from Ashburton to London (about 8 miles away).

We work across CR0, SE25 and CR9 and the streets around it. That includes homes on Long Lane, Tudor Road and Coe Avenue. Neighbouring places we cover include Woodside (1 mile north), Addiscombe (1 mile south), Shirley Oaks (1 mile south-east), Monks Orchard (1 mile south-east) and Shirley (1 mile south-east). Further out, we also cover London (8 miles north), City of Westminster (9 miles north-west), Marylebone (10 miles north), Kensington (10 miles north-west), St Pancras (10 miles north) and Shoreditch (10 miles north).

What’s near Ashburton

We visit homes around St Thomas Becket Catholic Primary School, Ashburton Park and Church of St Luke, among other places. Also close by are The Beehive pub (within half a mile west) and Oasis Academy Shirley Park (within half a mile south-east). The nearest railway station is Norwood Junction station, about 0.7 miles north-west. Further afield, we also cover the area around Whitgift Centre (1.6 miles south-west) and Addiscombe (0.7 miles south-west). For a walk, there’s Duppas Hill and Bramley Bank.

Map of Ashburton © OpenStreetMap contributors

What happens on the day

You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It normally takes a few hours, and you’re welcome to carry on with your day while we work.

  1. We clean the area and remove any loose enamel or rust.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, usually by the day after, the bath is ready to use.

Before we arrive

  • Keep pets and children out of the room while we work
  • Point us to the nearest place to park
  • Open a window if you can

Getting a price

For a price in Ashburton, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.

Get a free quote

Related advice

Do you need bath repair in Ashburton?

Rust generally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.

These are the problems we’re asked about most:

  • Rusty patches near the plughole
  • A cracked acrylic bath
  • A failed DIY repair that is discoloured or lifting
  • Chips under the taps

What to look for in a quote

  • What aftercare is recommended
  • How soon you can use it again
  • Who turns up on the day
  • What happens if the damage is worse than the photos show

10 questions to ask before you book

DIY kit or professional repair?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Materials and what they mean for the repair

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.

Landlord and trade work in Ashburton

We work for landlords, letting agents and housing providers in Ashburton as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

Ashburton questions

Can I get a quote without a visit?

Usually, yes. A close-up and a wider photo are enough to give a fixed price.

Can you redo an old repair?

Yes. We take out the old repair and do it properly. Tell us about it when you send photos.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

Is there a call-out fee?

Travel is included in the price, with the same prices everywhere we work.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.

Is there any odour?

Some materials have a smell while they’re applied. It clears as the materials cure.

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • We leave the room as we found it
  • CHAS and Constructionline accredited
  • Everything repaired in place
  • Typically one visit, start to finish

Read our prices page and resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.