Greater London · England

Bath and surface repairs in CR0

Live in CR0? Our technicians cover London, Croydon and Broad Green and every street in between, repairing in place.

Surface repairs across CR0

Our bath repair service in CR0

We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place with a one-year guarantee. We regularly repair pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and common reasons people contact us are a kit repair that didn’t last and a chip where the taps sit.

We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes two to three hours for most chips, and the room is left clean and tidy.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

What you will pay

Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

What you get with us

  • Work done at your home or business
  • Colour-matched on site
  • One price list for the whole UK
  • Accredited with CHAS, Constructionline and SafeContractor

Get a quote

To get a price, send a couple of photos using our quote form or ring us. We will say immediately if a repair is the right fix.

Near you in London

In London, that means homes near St Mary-at-Hill, St George the Martyr and The BFI Reuben Library and the streets around them. Also close by are Trinity Arms Public House (within half a mile south-east), Ark Globe Academy (within half a mile south), Charles Dickens Primary School (less than half a mile north-west) and Newington Gardens (under half a mile south). There is a railway station in London itself: Elephant & Castle station. Nearby you will also find Gabriel's Wharf (0.8 miles north-west) and Museum of Life Sciences (within half a mile north-east). Green spaces nearby include Bellenden Road Nature Garden and St. James's Park Lake.

  • Nearby schools include London School of Musical Theatre (under half a mile west)
  • Local facilities include County of London (1.1 miles north)

When a repair is not the answer

In fairness, some problems need a different fix:

  • Cracks in parts of an acrylic bath we cannot get to from below
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Wear across the whole surface, which needs re-enamelling

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Keeping it looking good

Most damage we see is avoidable. These habits help:

  • Get any new chip repaired before it rusts
  • Avoid scourers, wire wool and gritty cream cleaners
  • Check that an acrylic bath does not move when you stand in it
  • Rinse the bath after use, especially in hard water areas

Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.

A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.

What we are called out for in CR0

Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

Customers typically contact us about:

  • A hole punched through by something heavy
  • Rust by the waste and overflow
  • A failed DIY repair that is discoloured or lifting
  • A chip where the taps sit

DIY kit or professional repair?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Questions from CR0

Can you repair a crack in an acrylic bath?

Typically, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

Do you do work for letting agents?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Will the repair show?

On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.