North East Lincolnshire · England
Bath Repair in Ashby Hill
Problem with your bath in Ashby Hill? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Chips under the taps
- Impact holes in acrylic
When to call us in Ashby Hill
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
If you can see any of these, send us a picture:
- A chip where the taps sit
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
- A cracked acrylic bath
Questions to ask before you book
- Who turns up on the day
- How long the guarantee is and what it covers
- What prep work is covered
- Aftercare advice
How we handle bath repair in Ashby Hill
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. We regularly repair cast iron enamel, whirlpool & spa baths and acrylic, and the jobs we see most are damage beneath the taps and rusty patches near the plughole.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Ashby Hill (DN37)
- County
- North East Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace in Ashby Hill?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, and costs far less than the disruption of a replacement. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Ashby Hill. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Ashby Hill clients choose us
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
Read our prices page or resurfacing vs replacement cost guide.
Also near Ashby Hill
Also in Ashby Hill
How we price bath repair
Repairs from £95. You will know the full cost before booking. We look at:
- The material and finish
- How easy the damage is to reach
- How many areas need work
- Any earlier repairs that need removing first
The price reflects the work involved, not where you live. You’ll see the full price before you book.
Getting a price from pictures
We price nearly every job from photos. This is what to send:
- The material, if you know it
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Landlord and trade work in Ashby Hill
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
Covering Ashby Hill
Ashby Hill is about 5 miles south of Grimsby, in North East Lincolnshire. Whether you’re in the middle of Ashby Hill or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 34 towns and villages across North East Lincolnshire. We work right across the region, from Ashby Hill to Leeds (62 miles away).
All of DN37 is covered. If you are just outside Ashby Hill, we cover East Ravendale (1 mile south-west), Ashby cum Fenby (1 mile east), Brigsley (1 mile north-east), Barnoldby le Beck (2 miles north) and Grainsby (2 miles east). Larger places within reach include Grimsby (5 miles north), Cleethorpes (6 miles north-east), Immingham (10 miles north), Yarborough (6 miles north), New Clee (6 miles north-east) and East Marsh (6 miles north).
Near you in Ashby Hill
Our clients here include homes close to East Ravendale CofE Primary School Academy and Church of Saint Martin, among other places. A little further out are Diana (4.3 miles north).
Ashby Hill: your questions answered
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Do you work in Ashby Hill?
Yes. We work across the UK and travel to Ashby Hill and the rest of North East Lincolnshire. Send photos and we’ll quote, or call 0345 017 0787.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
How much does bath repair cost in Ashby Hill?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do you cover the entire of North East Lincolnshire?
Everywhere in the UK, Ashby Hill included. Travel is included in the price.
How long before I can use the bath?
Normally within a day, depending on the repair.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Get a dripping tap fixed promptly
- Do not leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
- Keep metal cans and razors off the surface
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and tidy away. Plan for a few hours, depending on the damage. Before we go, we will explain how long to leave it and how to care for it.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the day after.
How to prepare
- Keep pets and children out of the room while we work
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
Getting a price
Most customers in Ashby Hill get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair will not do:
- Cracks in acrylic we cannot reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
About our accreditations · Every repair comes with a one-year guarantee.
