Shropshire · England
Bath chip & crack repair in Aston, Shropshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Aston and across Shropshire. Free, fixed quotes from your pictures.
- Repairs from £95
- Impact holes in acrylic
- A cracked acrylic bath
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
About our bath repair in Aston
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for scratches you can feel with a fingernail and hairline or through cracks in acrylic, in roll-top & freestanding, whirlpool & spa baths and acrylic.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Aston (TF9)
- Region
- Shropshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Repairing versus replacing in Aston
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Why book with us
- Typically one visit, start to finish
- We come to you, anywhere in the UK
- We leave the room as we found it
- Fixed prices from your photos
See our prices page or bath cost comparison.
Towns and villages near Aston
Other services in Aston
Aston: your questions answered
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
I rent my home. Can I book you?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we will tell you before starting.
How much does bath repair cost in Aston?
Prices start from £95. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
Do you come to Aston?
Yes, we do. Repair technicians travel to Aston from across the region, with no extra charge for travel.
Do you need bath repair in Aston?
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Common reasons people in Aston contact us include:
- Scratches you can feel with a fingernail
- A failed DIY repair that is discoloured or lifting
- A cracked acrylic bath
- Chips caused by builders
What your quote should include
- How to look after the finish
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- How the colour is matched
Materials and what they mean for the repair
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- What kind of damage it is
- Access to the area
- How many areas need work
- Previous DIY repairs that have to come out
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Send pictures for a quote
You can normally get a fixed quote without us visiting. To make it quick:
- The material, if you know it
- Something in shot to show the size
- A wider photo showing the entire bath
- Details of any past repairs
Send us pictures of the damage and one of the entire item, with your TF9 postcode, and we’ll come back with a fixed quote.
How it works
We agree an arrival time beforehand. Once we’re there, the work takes a morning or an afternoon for most jobs. We leave the room clean and you will know when it can be used.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Let the surface dry out before the visit
How to get a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Read more
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Water coming from the waste or taps rather than the bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Acrylic
About Aston
Aston is about 7 miles south-west of Newcastle-under-Lyme, in Shropshire. Customers in Aston get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Aston is one of 433 places in Shropshire we cover. Our nearest city page is Manchester, about 36 miles away.
Here we cover the TF9 postcode area. If you’re just outside Aston, we cover Pipe Gate (1 mile west), Onneley (1 mile north), Ireland's Cross (1 mile west), Dorrington (1 mile west) and Madeley Park (2 miles east). We also work in nearby towns such as Market Drayton (7 miles south-west), Whitchurch (13 miles west), Loggerheads (3 miles south), Prees Higher Heath (12 miles west) and Hinstock (10 miles south).
Landmarks near Aston
In Aston, that means homes near Aston Chapel. Well-known places in the area include Castle Hill (2.4 miles south).
About our accreditations · Every repair comes with a one-year guarantee.
