Bolton · England
Bath chip & crack repair in Hunger Hill, Bolton
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Hunger Hill. Send photos for a free, fixed quote.
- Repairs from £95
- Scuffs and scratches in the surface
- Impact holes in acrylic
How we handle bath repair in Hunger Hill
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Our repair technicians work on acrylic, whirlpool & spa baths and roll-top & freestanding, and common reasons people contact us are a cracked acrylic bath and rusty patches near the plughole.
All our work comes with a one-year guarantee, wherever you are in Bolton.
- Area
- Hunger Hill (BL3)
- County
- Bolton
- Cover
- A year, on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Hunger Hill
- No extra charge for your area
- Everything repaired in place
- Dust sheets down, tidy finish
- Work done at your home or business
See our prices page or bath cost comparison.
When we would advise against a repair
Some jobs aren’t right for a repair, including:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Keeping it looking good
Once the work has cured, treat it gently:
- A dripping tap stains enamel, so fix it early
- Cover the bath during DIY or decorating
- Keep abrasive pads and gritty cleaners away from the bath
- If an acrylic bath flexes, have its feet adjusted
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Landlords, agents and businesses in Hunger Hill
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Hunger Hill use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Your questions about bath repair in Hunger Hill
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Hunger Hill.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Do you work in Hunger Hill?
Yes. We work across the UK and travel to Hunger Hill and the rest of Bolton. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you repair something that is been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When to call us in Hunger Hill
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.
The most common problems we are called about are:
- Scuffs and scratches in the surface
- Chips caused by builders
- A hole punched through by something heavy
- Hairline or through cracks in acrylic
Questions to ask before booking
- A fixed price, and whether VAT is included
- What preparation is included
- If travel is included in the price
- How the room is protected while they work
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Places near Hunger Hill
Other services in Hunger Hill
Hunger Hill and the surrounding area
Hunger Hill is about 2 miles north-east of Westhoughton, in Bolton. Customers in Hunger Hill get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We cover all 61 towns and villages in Bolton, from the larger towns to small villages. You can also see our page for Manchester, about 12 miles away.
Every address in BL3 is within our area. Whether you live on Hornby Drive, Wigan Road and Hunger Hill Avenue or anywhere nearby, we can come to you. Neighbouring places we cover include Chequerbent (1 mile south), Rumworth (1 mile north), Deane (1 mile north-east), Over Hulton (1 mile south-east) and Middle Hulton (1 mile east). We also work in nearby towns such as Bolton (3 miles north-east), Horwich (3 miles north-west), Halliwell (3 miles north-east), Farnworth (3 miles east), Kearsley (5 miles east) and Little Lever (5 miles east).
What’s near Hunger Hill
We visit homes around Beaumont Primary School, St Thomas & St John Lostock Parish Church and Ladybridge High School and the streets around them. The closest station to Hunger Hill is Lostock station, roughly 1 mile north. A little further out are Bolton Steam Museum (2.2 miles north-east) and Bolton Royal Infirmary (2.4 miles north-east). Open spaces near Hunger Hill include Nob End.
- Other local spots include Bolton le Moors (2.8 miles north-east)
The process
We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take a few hours, and we will tell you if anything changes.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the next day.
Before we arrive
- Ensure the area is dry
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
How to get a price
If you’re in Hunger Hill and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
