Aberdeenshire · Scotland
Bath chip & crack repair in Auchenblae, Aberdeenshire
Bath repair in and around Auchenblae: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- A cracked acrylic bath
About our bath repair in Auchenblae
Small damage on a bath is worth repairing early. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Typical jobs include a cracked acrylic bath and chips on the rim or sides, across acrylic, whirlpool & spa baths and pressed steel enamel.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Auchenblae (AB30)
- Region
- Aberdeenshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Auchenblae
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Your questions about bath repair in Auchenblae
Can you fix rust around the plughole?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
What does bath repair cost?
Repairs from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Will the repair last?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps.
Are there extra charges for Auchenblae?
Travel is included in the price, with the same prices everywhere we work.
Do you come to Auchenblae?
Yes. We cover the whole UK and come to Auchenblae and the rest of Aberdeenshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Do you cover the whole of Aberdeenshire?
The whole UK, including all of Aberdeenshire. Send your postcode with your photos and we will offer you dates.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. We do not add extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Colour mixed on the day to match
- One visit for most repairs
- Work done at your home or business
- CHAS and Constructionline accredited
Read our full price list or guide to resurfacing and replacement costs.
What affects the price in Auchenblae
Repairs from £95. We charge the same across the UK, including Auchenblae. What changes the price is:
- What the surface is made of
- How many areas need work
- Access to the area
- Any earlier repairs that need removing first
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
You can normally get a fixed price without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- The material, if you know it
- One picture of the entire bath
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Aftercare tips
Looking after the surface is easy:
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
- Keep metal cans and razors off the surface
- Use a soft cloth and washing-up liquid for everyday cleaning
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
What we can’t put right
A repair isn’t always the answer, and we’ll tell you before we start. We can’t fix:
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
Send us photos and we’ll tell you honestly.
Materials we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Nearby places to Auchenblae
What else we do in Auchenblae
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Covering Auchenblae
Auchenblae is about 13 miles north of Montrose, in Aberdeenshire. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Our repair technicians cover all 161 towns and villages in Aberdeenshire, from the larger towns to small villages. Our nearest city page is Edinburgh, about 72 miles away.
Every address in AB30 is within our area, from the main roads to the quietest streets. That includes homes on High Street, Mackenzie Avenue and Hillview Road and the roads around them. Close by, we cover Fordoun (2 miles south-east), Glenbervie (3 miles north-east), Drumlithie (4 miles east), Laurencekirk (5 miles south) and Arbuthnott (5 miles south-east). We also work in nearby towns such as Montrose (13 miles south), Stonehaven (10 miles north-east), Banchory (11 miles north), Newtonhill (14 miles north-east), Inverbervie (7 miles south-east) and St Cyrus (9 miles south).
Near you in Auchenblae
In Auchenblae, that means homes near Auchenblae Parish Church and the streets around them. For rail, the closest station is Laurencekirk station, roughly 4.4 miles south of the centre. Other landmarks nearby include Drumtochty Castle (1.9 miles north-west). Open spaces near Auchenblae include Herscha Hill.
What happens on the day
We turn up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Ensure the area is dry
- Point us to the nearest place to park
- Let us know about parking or access
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
