Conwy · Wales

Bath Repair for Llandudno Junction homes

Fixed-price bath repair in Llandudno Junction and the surrounding area, typically in one visit.

  • Repairs from £95
  • A kit repair that didn’t last
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Llandudno Junction

What we are called out for in Llandudno Junction

Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

Clients typically contact us about:

  • Rusty patches near the plughole
  • Damage done while the bathroom was being fitted
  • Scratches you can feel with a fingernail
  • A chipped rim or side

What to look for in a quote

  • A fixed price, and whether VAT is included
  • How the colour is matched
  • How long the guarantee is and what it covers
  • How to care for the finish

Our hiring checklist

Bath repair at your home in Llandudno Junction

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can generally use the bath the day after. Whether it’s cracks in an acrylic bath and scratches you can feel with a fingernail, we can help.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Acrylic bath corner rebuilt by Surface Doctor, before and after
Where
Llandudno Junction (LL31, LL28, LL32)
Region
Conwy
Cover
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026

For landlords and businesses

We work for landlords, letting agents and housing providers in Llandudno Junction as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.

What a repair cannot fix

Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:

  • Metal that has corroded all the way through
  • Wear across the entire surface, which needs re-enamelling
  • Flexing caused by a failed cradle or loose feet

Not sure? Send pictures and we will give you a straight answer before booking.

Surfaces we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel

Common questions in Llandudno Junction

What do you need from me?

Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.

How invisible is a bath repair?

The goal is a repair that blends in. The rest of the bath’s condition makes a difference.

Is there any odour?

It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

What happens next?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.

What happens if you find more damage?

The price is fixed for what the pictures show. If there’s more, we will tell you before starting.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

What about rust by the waste?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

Llandudno Junction and nearby

Llandudno Junction is about 3 miles south-east of Llandudno, in Conwy. Jobs in Llandudno Junction are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. Llandudno Junction is one of 75 towns and villages in Conwy where we work. Our jobs stretch from Llandudno Junction to Liverpool (37 miles away).

Here we cover the LL31, LL28 and LL32 postcode area. From 6g Road, New Road and Vale Road or a nearby road, a technician can come to you. Llandudno Junction sits on or near the A55 and A470, so getting to you is simple. Nearby, we also work in Conwy (1 mile west), Tywyn (1 mile north-west), Gyffin (1 mile west), Cadnant Park (2 miles west) and Hendre (2 miles west). Further out, we also cover Bae Colwyn (3 miles east), Llandudno (3 miles north-west), Old Colwyn (4 miles east), Colwyn Bay (4 miles east), Abergele (9 miles east) and Colwyn Bay (3 miles east). Llandudno Junction is one of the larger places we cover in Conwy.

Local landmarks in Llandudno Junction

Typical jobs here are in homes near The Maelgwyn pub, Ysgol Aberconwy and Parish Church of St Ffraid. Llandudno Junction’s nearest station is Llandudno Junction station, roughly 0.5 miles north-west of the centre. Other landmarks nearby include Conwy Castle (1.1 miles west) and Conwy Hospital (1.9 miles west). Not far away are Rhos on Sea Golf Course Lake and Coed Dolwyd.

  • Local facilities include Marl (0.9 miles north-west)
Map of Llandudno Junction © OpenStreetMap contributors

The process

The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes two to three hours for most chips. Before we leave, we explain how soon it can be used and how to look after it.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the day after.

Getting ready for the visit

  • Open a window if you can
  • Keep a parking space free if you can
  • Plan for the room to be out of bounds to pets and children

Get a quote

If you are in Llandudno Junction and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Get a free quote

Related advice

Can I fix it myself?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

Repair or replace in Llandudno Junction?

If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

Why choose Surface Doctor in Llandudno Junction

  • Repair technicians who travel to you, UK-wide
  • Colour-matched on site
  • One visit for most repairs
  • A year’s guarantee on all work

See our prices page and resurfacing vs replacement cost guide.

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

What affects the price in Llandudno Junction

Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:

  • How many areas need work
  • Whether old repairs or coatings need taking off
  • The material
  • Whether we combine several jobs

A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.

How to get a fixed quote

It only takes a minute to photograph the damage. Try to send:

  • A coin or ruler next to the damage for scale
  • A photo taken from further back
  • The material, if you know it
  • One sharp close-up of the damage

Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and no obligation.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.