Conwy · Wales

Bath Repair for Bryn-y-maen homes

Chip and crack repairs to enamel, acrylic and cast iron baths in Bryn-y-maen, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Bryn-y-maen

Looking after it afterwards

Good habits make a big difference to how long a repair lasts:

  • Cover the bath during DIY or decorating
  • Keep metal cans and razors off the surface
  • Keep abrasive pads and gritty cleaners away from the bath
  • Stick to mild cleaners and a soft cloth

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

About our bath repair in Bryn-y-maen

A repair fixes just the damaged area and blends it into the rest of the bath, which costs far less than replacing a fitted bath. Most baths can be used again the day after. Whether it’s snagging damage from a refit and scratches you can feel with a fingernail, we can typically put it right.

A one-year guarantee comes as standard, so you’re covered after the visit.

Location
Bryn-y-maen (LL28)
Area hub
Conwy
Guarantee
A year, on every repair
Quotes
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

What a repair can’t fix

To be straight with you, some problems need a different fix:

  • Leaking fittings, which need a plumber
  • Wear across the whole surface, which needs re-enamelling
  • Flexing caused by a failed cradle or loose feet

Send us photos and we’ll tell you honestly before you book.

What we work on

  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic

Should you replace it?

Swapping a damaged bath for a new one normally involves a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in one visit. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.

What you get with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Colour-matched on site
  • One-year guarantee on every repair
  • One price list for the entire UK

Read our prices page and bath cost comparison.

Our work in Bryn-y-maen

Bryn-y-maen is about 2 miles south-west of Bae Colwyn, in Conwy. Jobs in Bryn-y-maen are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Our technicians cover all 75 towns and villages in Conwy. We work right across the region, from Bryn-y-maen to Liverpool (about 35 miles away).

Postcode districts we cover here: LL28. Neighbouring places we cover include Colwyn Bay (1 mile north-east), Mochdre (1 mile north), Dolwyd (2 miles north-west), Bae Colwyn (2 miles north-east) and Bryn-rhys (2 miles west). Within a short drive, we also cover Llandudno (5 miles north-west), Abergele (7 miles east), Conwy (3 miles west), Cwlach (5 miles north-west), Deganwy (4 miles north-west) and Rhos-on-Sea (3 miles north).

Near you in Bryn-y-maen

In Bryn-y-maen, that means homes near Ysgol Bryn Elian and Christ Church. The nearest railway station is Colwyn Bay station, about 2 miles north-east. Other landmarks nearby include Ednyfeds Castle (2.3 miles north) and Conwy Mussel Museum (3.4 miles west). Open spaces near Bryn-y-maen include Rhos on Sea Golf Course Lake and Ffridd y Mynydd North Top.

Map of Bryn-y-maen © OpenStreetMap contributors

Should I try a DIY kit first?

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

Your questions about bath repair in Bryn-y-maen

Will there be a smell?

It depends on the job, but often a little. Ventilation keeps it to a minimum.

How long before I can use the bath?

Most baths can be used the next day. We confirm the time before we leave.

How much does bath repair cost in Bryn-y-maen?

Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

Is a bath repair permanent?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.

When can you do it?

That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.

What bath repair costs

Prices start from £95. Every quote is fixed and free. What we look at:

  • How easy the damage is to reach
  • The colour and finish to match
  • What the surface is made of
  • What kind of damage it is

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking.

Getting a price from photos

A couple of clear pictures is all it takes. It helps if you send:

  • A coin or ruler next to the damage for scale
  • The postcode, so we can plan the visit
  • The material, if you know it
  • Whether it’s been repaired or coated before

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.

Different materials, different repairs

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

The process

The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the day after.

Before we arrive

  • Let us know if it has been repaired before
  • Make sure the area is dry
  • Have somewhere for us to park nearby if possible

Get a quote

We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.

Get a fixed price

Read more

Landlords, agents and businesses in Bryn-y-maen

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

We work for landlords, letting agents and housing providers in Bryn-y-maen as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.