Hampshire · England
Bath Repair for Bagnum homes
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Bagnum. Free, fixed quotes from your pictures.
- Repairs from £95
- Snagging damage from a refit
- Impact holes in acrylic
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Keep metal cans and razors off the surface
- Fix dripping taps early to stop staining and limescale
- Do not leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
There is nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and it can start to leak underneath.
Bath repair at your home in Bagnum
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on roll-top & freestanding, acrylic and cast iron enamel, and common reasons people contact us are scuffs and scratches in the surface and rust by the waste and overflow.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Bagnum (BH24)
- Area hub
- Hampshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
It helps to know what we cannot do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaking fittings, which need a plumber
- Wear across the entire surface, which needs re-enamelling
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Bagnum
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
Signs you need bath repair in Bagnum
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
It’s worth getting a quote if you see:
- Chips along the edge of the bath
- A failed DIY repair that is discoloured or lifting
- A cracked acrylic bath
- Scuffs and scratches in the surface
Before you book anyone
- Aftercare advice
- Whether a trained technician does the job
- What prep work is covered
- How the colour is matched
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How it works
Arrival times are agreed in advance. On site, it takes two to three hours for most chips for most jobs. The room is left tidy and ready to use once it has cured.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the following day.
Before we arrive
- Let the surface dry out before the visit
- Open a window if you can
- Move bottles, mats and clutter away from the area
Get a quote
For a price in Bagnum, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Advice
FAQs for Bagnum
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Something went through my bath. Can it be fixed?
Usually. Photos of the hole and the underside help us check.
Will there be a smell?
There can be some smell while we work. It fades as everything cures.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your pictures and you will get one combined price.
Work for landlords and builders
Landlords, letting agents and housing providers in Bagnum use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
Nearby places to Bagnum
What else we do in Bagnum
What bath repair costs
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- How hard the colour is to match
- The type of damage
- Previous DIY repairs that have to come out
- The material
Our prices are the same across the UK, so there’s no premium for Bagnum. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your photos
Phone photos are fine. Ensure they show:
- Any details about the material
- Details of any past repairs
- The postcode, so we can plan the visit
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Bagnum and nearby
Bagnum is about 2 miles south-east of Ringwood, in Hampshire. We visit customers in Bagnum and the surrounding area, so you do not need to take anything anywhere. Bagnum is one of 683 towns and villages in Hampshire we cover.
Here we cover the BH24 postcode area. Nearby, we also work in Crow (1 mile north), Upper Kingston (1 mile north-west), Hightown (1 mile north), Foulford (2 miles north) and Ringwood (2 miles north-west). We also work in nearby towns such as Totton (13 miles north-east), Lymington (10 miles south-east), New Milton (6 miles south-east), Barton on Sea (7 miles south-east), Dibden Purlieu (15 miles east) and Marchwood (14 miles east).
Local landmarks in Bagnum
Our customers here include homes close to Ringwood School, among other places. Further afield, we also cover the area around St Leonard's Hospital (4.4 miles west). Green spaces nearby include St Catherine's Hill and Linbrook Lake.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
