Dundee · Scotland
Bath Repair in Ballumbie
Our repair technicians come to Ballumbie for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- Snagging damage from a refit
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
- Colour-matched on site
- Repair technicians who travel to you, UK-wide
Take a look at our full price list and guide to resurfacing and replacement costs.
Bath repair at your home in Ballumbie
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. If you are dealing with a kit repair that didn’t last and damage done while the bathroom was being fitted, we can usually put it right, on cast iron enamel, whirlpool & spa baths and pressed steel enamel alike.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Ballumbie (DD4, DD5)
- Area hub
- Dundee
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near Ballumbie
Also in Ballumbie
What we do, step by step
We begin by going over the job with you. After that, protection goes down around the work area and we start. It normally takes a morning or an afternoon.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
Before we arrive
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
- Let us know about parking or access
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
Questions from Ballumbie
Do you come to Ballumbie?
We do. We send a technician to Ballumbie for every job, and the price is the same as everywhere else.
How soon can you come?
We will give you dates with your quote. Tell us if you need it done quickly.
Is a bath repair durable?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
How do I get a price for bath repair in Ballumbie?
Repairs from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your DD4 postcode.
Common problems we fix in Ballumbie
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
You may need us if you’ve spotted any of these:
- Chips caused by builders
- Chips under the taps
- Cracks in an acrylic bath
- Chips on the rim or sides
Questions to ask before you book
- What aftercare is recommended
- Whether they match the colour on site
- What the guarantee covers, and for how long
- Whether the price covers travel
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Landlord and trade work in Ballumbie
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- Check that an acrylic bath doesn’t move when you stand in it
- Put a towel in the bath if you’re working above it
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Ballumbie and the surrounding area
Ballumbie is about 2 miles north-west of Broughty Ferry, in Dundee. Wherever you are in the DD4 postcode area, we carry out the work at your property. Ballumbie is one of 50 places in Dundee where we work. You can also see our page for Edinburgh, about 40 miles away.
Our technicians cover all of DD4 and DD5 and the streets around it. Whether you live on Drumgeith Road, Ballumbie Road and Earlston Avenue or a nearby road, we can come to you. If you’re just outside Ballumbie, we cover Whitfield (1 mile west), Douglas (1 mile south), Pitkerro (1 mile south-west), Craigiebank (2 miles south-west) and Mill of Mains (2 miles west). Further out, we also cover Dundee (3 miles south-west), Stobswell (3 miles south-west), Monifieth (3 miles east), Blackness (4 miles south-west), Logie (4 miles south-west) and St Marys (4 miles west).
Landmarks near Ballumbie
In Ballumbie, that means homes near Braeview Academy and Dundee. For rail, the closest station is Broughty Ferry station, roughly 2.1 miles south-east. Nearby you’ll also find Maryfield Hospital (2.3 miles south-west) and James Guthrie Orchar Art Gallery (2.3 miles south-east). The countryside around Ballumbie includes Balgay Hill and Trottick Mill Ponds.
What we cannot put right
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we can’t reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we will give you a straight answer.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
