Dundee · Scotland

Bath chip & crack repair in St Marys, Dundee

Bath repair in St Marys without the cost of replacing. Get a fixed quote from your pictures, then book a visit.

  • Repairs from £95
  • A cracked acrylic bath
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near St Marys

How we handle bath repair in St Marys

Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. There’s no plumbing to disconnect, the tiles aren’t touched, and the repaired area is colour matched so it blends in. We regularly repair roll-top & freestanding, cast iron enamel and pressed steel enamel, and the jobs we see most are rust spots around the plughole and chips under the taps.

The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.

Location
St Marys (DD3, DD2)
Region
Dundee
Guarantee
12 months on all our work
Price
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Last updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Common problems we fix in St Marys

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. We repair snagging damage like this regularly.

Keep an eye out for these signs:

  • Rust spots around the plughole
  • A cracked acrylic bath
  • A chip where the taps sit
  • Impact holes in acrylic

What your quote should include

  • A fixed price, and whether VAT is included
  • Whether there are any call-out or travel charges
  • What the guarantee covers, and for how long
  • What protection goes down before work starts

How to compare quotes

Landlords, agents and businesses in St Marys

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

About St Marys

St Marys is about 2 miles north-west of Dundee, in Dundee. We visit homes and businesses in St Marys and the surrounding area, so you don’t need to take anything anywhere. St Marys is one of 50 places in Dundee where we work. Our nearest city page is Edinburgh, about 39 miles away.

Jobs in DD3 and DD2 are booked in the same way as anywhere else. You’ll find streets such as Troon Road, Troon Avenue and Gullane Road, and we cover them all. We also travel to Ardler (1 mile south), Dryburgh (1 mile south), Camperdown (1 mile south-west), Lochee (1 mile south) and Birkhill (2 miles west). Larger places within reach include Broughty Ferry (6 miles east), Stobswell (3 miles south-east), Monifieth (7 miles east), Barnhill (6 miles east), Pitkerro (3 miles east) and Whitfield (3 miles east). St Marys is among the bigger towns we cover in Dundee.

Landmarks near St Marys

We visit homes around Dundee, Balgay Hill and Cox Branch Library and the streets around them. For rail, the closest station is Invergowrie station, about 3 miles south-west. Nearby you’ll also find Wellgate Centre (2.6 miles south-east) and Strathmartine Castle (1.5 miles north). Open spaces near St Marys include Balgay Hill and Trottick Mill Ponds.

Map of St Marys © OpenStreetMap contributors

Different materials, different repairs

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

What happens on the day

Here’s how a visit normally runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow a morning or an afternoon from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

How to prepare

  • Let us know which floor the room is on
  • Clear toiletries, mats and anything else from around the area
  • Have a window or extractor fan available

Getting a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You will get a fixed price, not an estimate.

Send photos for a quote

Read more

How to care for the repair

Most damage we see is avoidable. A few tips:

  • Stick to mild cleaners and a soft cloth
  • Do not leave razors or cans standing in the bath
  • Do not leave a fresh chip for long
  • Protect the bath with a towel when doing jobs nearby

For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.

Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

St Marys: your questions answered

Will the price change on the day?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

I tried a repair kit. Can you fix it?

Yes. We remove the old filler and start again. Tell us about it when you send pictures.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Is a bath repair permanent?

A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.

How soon can you come?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Repair or replace in St Marys?

Swapping a damaged bath for a new one generally means a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why book with us

  • Straight answers about what a repair can do
  • Same prices wherever you are
  • We come to you, anywhere in the UK
  • One visit for most repairs

See our pricing or resurfacing vs replacement cost guide.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

What affects the price in St Marys

Prices start from £95. Every quote is fixed and free. What we take into account:

  • How many areas need work
  • The colour and finish to match
  • Doing more than one item at once
  • The type of damage

Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Send pictures for a quote

When you take your pictures, these tips help us give you a firm price:

  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • Whether it’s been repaired or coated before
  • Any details about the material

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.