Hampshire · England
Bath chip & crack repair in Brockenhurst, Hampshire
Problem with your bath in Brockenhurst? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- Rusty patches near the plughole
- Scuffs and scratches in the surface
About our bath repair in Brockenhurst
We’ve repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. We work on cast iron enamel, acrylic and roll-top & freestanding, and common reasons people contact us are an old repair that has yellowed or come loose and damage done while the bathroom was being fitted.
Big or small, you get the same one-year guarantee.
- Area
- Brockenhurst (SO42)
- County
- Hampshire
- Guarantee
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
Some jobs are not right for a repair, including:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
Send us pictures and we’ll tell you honestly.
Materials we repair
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
Landlord and trade work in Brockenhurst
For anyone letting property in or around Brockenhurst, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
What bath repair costs
Prices start from £95. You will not pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- A picture taken from further back
Send us a picture of the damage and a wider shot of the entire item, and tell us you’re in Brockenhurst, and we’ll come back with a fixed quote.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Also near Brockenhurst
Also in Brockenhurst
Our work in Brockenhurst
Brockenhurst is about 5 miles north of Lymington, in Hampshire. Clients in Brockenhurst get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. Brockenhurst is one of 683 places in Hampshire we cover. You can also see our page for London, about 80 miles away.
We cover every part of SO42. Local streets include Fibbards Road, The Rise and Brookley Road, and we cover them all. We also travel to South Weirs (1 mile south-west), Setley (1 mile south), Balmerlawn (1 mile north-east), Lyndhurst (4 miles north) and Emery Down (4 miles north). We also work in nearby towns such as Eastleigh (14 miles north-east), Totton (8 miles north-east), Chandler's Ford (14 miles north-east), Hedge End (14 miles north-east), Lymington (5 miles south) and Romsey (13 miles north).
Landmarks near Brockenhurst
In Brockenhurst, that means homes near Church of St Saviour, Brockenhurst Church of England Primary School and Morant Arms. Brockenhurst has its own railway station: Brockenhurst station. Other landmarks nearby include Lymington New Forest Hospital (3.8 miles south).
Common problems we fix in Brockenhurst
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Signs it’s time to call us include:
- Chips along the edge of the bath
- Impact holes in acrylic
- Scratches you can feel with a fingernail
- An old repair that has yellowed or come loose
What your quote should include
- What happens if the damage is worse than the pictures show
- What preparation is included
- If travel is included in the price
- Whether they match the colour on site
Brockenhurst questions
Can you quote from photos?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Do you cover the entire of Hampshire?
Across the UK, and that includes Brockenhurst. Our prices are the same everywhere.
What happens if you find more damage?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
How do I get a price for bath repair in Brockenhurst?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a morning or an afternoon.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Advice
How to look after the repair
Nothing complicated is needed:
- Rinse the bath after use, especially in hard water areas
- Get a dripping tap fixed promptly
- Check that an acrylic bath does not move when you stand in it
- Protect the bath with a towel when doing jobs nearby
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
About our accreditations · Every repair comes with a one-year guarantee.
