Hampshire · England
Bath Repair for South Weirs homes
We travel to South Weirs for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- Chips on the rim or sides
Prices and what affects them
Repairs from £95. Prices are worked out job by job, from your pictures. What matters most is:
- The material and finish
- What kind of damage it is
- Any earlier repairs that need removing first
- How easy the damage is to reach
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- What it’s made of, if you know
- One picture of the entire bath
- Where you are, by postcode
- A coin or ruler next to the damage for scale
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Bath repair in South Weirs, done in place
A damaged bath does not have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. Common call-outs are for snagging damage from a refit and chips on the rim or sides, in cast iron enamel, acrylic and pressed steel enamel.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll sort it.
- Location
- South Weirs (SO42)
- County
- Hampshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from South Weirs
Are there extra charges for South Weirs?
Travel is included in the price, and we charge the same wherever you are.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Can a cracked acrylic bath be fixed?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens after I send photos?
You’ll get a fixed quote back. You are under no obligation.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. The price reflects the work involved, not where you live. You’ll see the full price before you book, with no extras added later.
Why book with us
- Free fixed quotes from pictures
- Honest advice, even when it means no job
- Everything repaired in place
- Rooms protected and left tidy
See our full price list or resurfacing vs replacement cost guide.
Keeping it looking good
After the repair has cured, a few habits help it last:
- Do not leave a fresh chip for long
- Fix dripping taps early to stop staining and limescale
- Protect the bath with a towel when doing jobs nearby
- Do not leave razors or cans standing in the bath
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
How the visit works
We agree an arrival time beforehand. Once we’re there, the work takes a few hours. We leave the room clean and you will know when it can be used.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Preparing for the visit
- Point us to the nearest place to park
- Have a window or extractor fan available
- Let us know if it has been repaired before
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
Covering South Weirs
South Weirs is about 4 miles north-west of Lymington, in Hampshire. Whether you’re in the middle of South Weirs or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 683 towns and villages in Hampshire, from the larger towns to small villages. Our jobs stretch from South Weirs to London (about 80 miles away).
Our visits in SO42 work the same way as everywhere else we cover. Nearby, we also work in Brockenhurst (1 mile north-east), Setley (1 mile east), Balmerlawn (2 miles north-east), Emery Down (4 miles north) and Lyndhurst (4 miles north). Further out, we also cover Eastleigh (15 miles north-east), Totton (8 miles north-east), Chandler's Ford (15 miles north-east), Hedge End (15 miles north-east), Lymington (4 miles south-east) and Romsey (13 miles north).
Near you in South Weirs
Locally, our jobs take us to homes close to Brockenhurst Church of England Primary School and Church of St Saviour. South Weirs’s nearest station is Brockenhurst station, roughly 0.9 miles east. Well-known places in the area include Lymington New Forest Hospital (3.7 miles south-east).
Landlords, agents and businesses in South Weirs
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We carry out planned and one-off repairs for housing associations and facilities teams in Hampshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
What we can’t put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think.
Materials we work on in South Weirs
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What we are called out for in South Weirs
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Look out for these signs:
- Damage done while the bathroom was being fitted
- A chipped rim or side
- Scuffs and scratches in the surface
- Holes from dropped items
Questions to ask before you book
- When it can be used again
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
- What aftercare is recommended
Nearby places to South Weirs
Other services in South Weirs
About our accreditations · Every repair comes with a one-year guarantee.
