South Ayrshire · Scotland
Bath chip & crack repair in Barassie, South Ayrshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Barassie, with a one-year guarantee on every repair.
- Repairs from £95
- Chips under the taps
- Chips on the rim or sides
Landlords, agents and businesses in Barassie
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For anyone letting property in or around Barassie, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
How we handle bath repair in Barassie
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Whether it’s damage beneath the taps and scratches you can feel with a fingernail, we can help, whatever the material.
All our work is covered by a one-year guarantee, wherever you are in South Ayrshire.
- Area
- Barassie (KA10, KA11)
- County
- South Ayrshire
- Cover
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
More services for Barassie
Should you replace it?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
Why Barassie customers choose us
- No need to remove anything
- We leave the room as we found it
- Every repair guaranteed for a year
- Free fixed quotes from pictures
Read our full price list or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Your questions about bath repair in Barassie
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Do you come to Barassie?
Yes. We work across the UK and come to Barassie. Send photos and we will quote, or call 0345 017 0787.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
What happens once I’ve sent photos?
You get a fixed price and available dates. If we need another angle, we will ask.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What a repair can’t fix
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we will say what we think before booking.
What we work on
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
What affects the price in Barassie
Prices start from £95. We give every job a fixed price from photos. This is what makes a difference:
- What kind of damage it is
- Where the damage is and how we get to it
- The colour and finish to match
- Whether old repairs or coatings need taking off
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- A close-up of the damage, in focus
- Where you are, by postcode
- Any earlier repairs or coatings
- A picture taken from further back
Email us a picture of the damage and a wider shot of the whole item, and tell us you’re in Barassie, and we’ll reply with a fixed quote.
What happens on the day
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the next day.
Before we arrive
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
Ask for a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Advice
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Rinse it down after each bath
- Get any new chip repaired before it rusts
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Barassie and nearby
Barassie is about 1 mile north of Troon, in South Ayrshire. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. Barassie is one of 52 towns and villages in South Ayrshire where we work. You can also see our page for Glasgow, about 24 miles away.
We work across KA10 and KA11. Whether you live on Lang Road, Whins Road and Clark Lane or a nearby road, we can come to you. We also cover the places around Barassie: Collennan (1 mile south-east), Troon (1 mile south), Loans (1 mile south-east), Dundonald (2 miles north-east) and Shewalton (2 miles north). Further out, we also cover Ayr (8 miles south), Prestwick (5 miles south), Heathfield (6 miles south), Belmont (8 miles south), Forehill (8 miles south) and Maybole (15 miles south).
Landmarks near Barassie
We visit homes around Marr College and the streets around them. Barassie’s nearest station is Barassie station, about 0.5 miles south-west of the centre. Well-known places in the area include Auchans Castle (1.4 miles north-east) and Ayrshire Central Hospital (4.8 miles north). The countryside around Barassie includes Caprington Loch.
About our accreditations · Every repair comes with a one-year guarantee.
