North Yorkshire · England
Bath Repair in Beadlam
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Beadlam. Send pictures for a free, fixed quote.
- Repairs from £95
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
For landlords and businesses
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
If you manage property in Beadlam, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
About our bath repair in Beadlam
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We’re frequently asked to fix a kit repair that didn’t last and deep scratches in acrylic, across cast iron enamel, whirlpool & spa baths and acrylic.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Beadlam (YO62)
- County
- North Yorkshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Beadlam
Beadlam is about 18 miles east of Northallerton, in North Yorkshire. Whether you are in the middle of Beadlam or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 626 places in North Yorkshire, from the larger towns to small villages. Our nearest city page is Leeds, about 38 miles away.
Our visits in YO62 are booked in the same way as anywhere else. Local streets include The Croft, High Lane and Gale Lane, and we cover them all. Neighbouring places we cover include Nawton (1 mile east), Wombleton (1 mile east), Pockley (1 mile north-west), Harome (2 miles south) and Welburn (2 miles east). Larger places within reach include Malton (11 miles south-east), Pickering (9 miles east), Thirsk (14 miles west), Easingwold (12 miles south-west), Norton-on-Derwent (12 miles south-east) and Sowerby (14 miles west).
Local landmarks in Beadlam
Around Beadlam, we work in homes near Rose And Crown Inn, Ryedale School and Church of St Hilda and the streets around them. A little further out are Helmsley Castle (2.6 miles west) and Kirkdale (1 mile north-east).
Do you need bath repair in Beadlam?
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Clients normally contact us about:
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
- A chip where the taps sit
- A kit repair that didn’t last
What your quote should include
- A fixed price, and whether VAT is included
- How the room is protected while they work
- What happens if the damage is worse than the pictures show
- The length of the guarantee and what it covers
Repair or replace in Beadlam?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before you book
- We will tell you if it’s not worth repairing
Read our prices page and guide to resurfacing and replacement costs.
Questions from Beadlam
Is a holed acrylic bath repairable?
Typically. Photos of the hole and the underside help us check.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you come to Beadlam?
We do. We send a technician to Beadlam for every job, and the price is the same as everywhere else.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the next day, the bath is ready to use.
Before we arrive
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
How to get a price
If you are in Beadlam and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
Other services in Beadlam
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
When a repair is not the answer
A repair is not right for every job, for example:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Acrylic cracks with no access behind them
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Beadlam
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
What bath repair costs
Prices start from £95. Prices are worked out job by job. The main factors are:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- How much damage there is
- Access to the area
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Send pictures for a quote
You can take the pictures on your phone, there’s no need for anything special. Just ensure we can see:
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Your postcode, so we can check dates
- Any details about the material
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
