North Yorkshire · England
Bath Repair in Harome
Fixed-price bath repair in Harome and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Cracks in an acrylic bath
- A chip where the taps sit
Common problems we fix in Harome
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
The things customers generally mention when they call are:
- Scuffs and scratches in the surface
- Damage beneath the taps
- A hole punched through by something heavy
- Damage done while the bathroom was being fitted
What to look for in a quote
- What protection goes down before work starts
- What preparation is included
- A fixed quote, and whether VAT is included
- Whether they match the colour on site
How we handle bath repair in Harome
A typical bath repair is a few hours’ work, and you can normally bathe again the following day. You will not need a plumber or tiler, because nothing is disconnected. Whether it’s snagging damage from a refit and a chipped rim or side, we can typically put it right, on cast iron enamel, pressed steel enamel and whirlpool & spa baths alike.
Big or small, it’s backed by a one-year guarantee in Harome and across North Yorkshire.
- Where
- Harome (YO62)
- County
- North Yorkshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place. Our bath repair starts from £95. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
What you get with us
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
- A fixed quote before booking
- Rooms protected and left tidy
See our full price list and guide to resurfacing and replacement costs.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Harome. What changes the price is:
- Previous DIY repairs that have to come out
- Unusual colours or finishes
- How many items we do on one visit
- How many areas need work
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Covering Harome
Harome is about 19 miles south-east of Northallerton, in North Yorkshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in all 626 towns and villages across North Yorkshire. You can also see our page for Leeds, about 37 miles away.
Jobs in YO62 work the same way as everywhere else we cover. You’ll find streets such as Main Street, Knavesmire Close and Back Lane, and we cover them all. Close by, we cover Beadlam (2 miles north), Nawton (2 miles north), Wombleton (2 miles north-east), Nunnington (2 miles south-east) and Helmsley (2 miles north-west). Further out, we also cover Malton (11 miles south-east), Pickering (9 miles east), Thirsk (13 miles west), Easingwold (11 miles south-west), Norton-on-Derwent (12 miles south-east) and Sowerby (14 miles west).
Around Harome
Locally, our jobs take us to homes close to Church of St Saviour and Ryedale School. Other landmarks nearby include Helmsley Castle (2.5 miles west) and Kirkdale (2.3 miles north-east).
Landlord and trade work in Harome
For anyone letting property in or around Harome, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Also near Harome
Also in Harome
What a repair cannot fix
Before booking, it’s worth knowing the limits too:
- Wear across the whole surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
Send us photos and we will tell you honestly.
Materials we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we are done and tell you when it’s ready to use.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
How to prepare
- Make sure the room can be ventilated
- Have somewhere for us to park nearby if possible
- Tell us about any previous repairs or coatings
How to get a price
Most customers in Harome get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Aftercare tips
Once the work has cured, treat it gently:
- Do not leave a fresh chip for long
- If an acrylic bath flexes, have its feet adjusted
- Store metal items away from the bath
- Keep abrasive pads and gritty cleaners away from the bath
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine without abrasive products.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Common questions in Harome
How long does the repair take to cure?
Normally within a day, though it depends on what we’ve done.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Is the work guaranteed?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
About our accreditations · Every repair comes with a one-year guarantee.
