Herefordshire · England
Bath chip & crack repair in Bearwood, Herefordshire
We travel to Bearwood for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A chipped rim or side
- An old repair that has yellowed or come loose
How we handle bath repair in Bearwood
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. Common call-outs are for chips along the edge of the bath and chips caused by builders, in pressed steel enamel, roll-top & freestanding and cast iron enamel.
Every job is backed for twelve months in Bearwood and everywhere else. We return to put right any problem with the work.
- Area
- Bearwood (HR6)
- County
- Herefordshire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Bearwood
If you manage property in Bearwood, we will quote for several properties at once. Send pictures for each one and we’ll price them together.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Also near Bearwood
Other services in Bearwood
Where we work around Bearwood
Bearwood is about 7 miles west of Leominster, in Herefordshire. Anywhere in HR6, a technician comes to you. Bearwood is one of 255 towns and villages in Herefordshire where we work. You can also see our page for Birmingham, about 47 miles away.
Here we cover the HR6 postcode area. We also travel to Pembridge (1 mile north), Marston (1 mile north-west), Moorcot (2 miles west), Lower Broxwood (2 miles south-west) and Dilwyn (2 miles east). Within a short drive, we also cover Hereford (13 miles south-east), Leominster (7 miles east), Redhill (13 miles south-east), Newton Farm (13 miles south-east), Whitecross (12 miles south-east) and Eign Hill (13 miles south-east).
Around Bearwood
Further afield, we also cover the area around Weobley Museum (3.1 miles south-east) and Moated mound S of church (2.3 miles south-east). Open spaces near Bearwood include Titley Pool and Titley Pool.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.
Do you need bath repair in Bearwood?
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The most common problems we are called about are:
- Chips caused by builders
- A chip where the taps sit
- Impact holes in acrylic
- Rust spots around the plughole
What your quote should include
- What preparation is included
- How to care for the finish
- How the colour is matched
- Whether a trained technician does the job
What a repair cannot fix
Some jobs are not right for a repair, including:
- Water coming from the waste or taps rather than the bath
- Wear across the entire surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
Send us photos and we’ll tell you honestly before booking.
What we work on
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Getting a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Related advice
Aftercare tips
It’s all simple stuff:
- Give the bath a quick rinse after use
- Protect the bath with a towel when doing jobs nearby
- Check that an acrylic bath doesn’t move when you stand in it
- Don’t leave a fresh chip for long
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Bearwood questions
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Are there extra charges for Bearwood?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
How much does bath repair cost in Bearwood?
Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
How we price bath repair
Prices start from £95. We give every job a fixed price from pictures. This is what makes a difference:
- The material
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Unusual colours or finishes
Our prices are the same across the UK, with no extra for Bearwood. The job itself decides the price: the material, the amount of damage and how many items.
How to get a fixed quote
Two or three clear photos are usually enough. Try to include:
- One sharp close-up of the damage
- What it’s made of, if you know
- One picture of the entire bath
- Whether it’s been repaired or coated before
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
