Oxfordshire · England
Bath chip & crack repair in Beckley, Oxfordshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Beckley, carried out at your home and guaranteed for a year.
- Repairs from £95
- Damage beneath the taps
- Rust by the waste and overflow
Bath repair in Beckley without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Typical jobs include scratches you can feel with a fingernail and a failed DIY repair that’s discoloured or lifting, in roll-top & freestanding, pressed steel enamel and cast iron enamel.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Location
- Beckley (OX3, OX33)
- Area hub
- Oxfordshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- The material
- The colour and finish to match
- The type of damage
- How easy the damage is to reach
A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Any details about the material
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Also near Beckley
Other services in Beckley
Looking after it afterwards
Aftercare is simple:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Don’t scrub with anything abrasive
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We work for landlords, letting agents and housing providers in Beckley as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Common problems we fix in Beckley
Acrylic baths that crack nearly always have a support problem. Legs that are not adjusted, a missing cradle or a soft floor let the base flex until it cracks.
Send us a picture if you notice any of these:
- Rust by the waste and overflow
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
- Chips on the rim or sides
What your quote should include
- What preparation is included
- How the room is protected while they work
- Whether they match the colour on site
- How long it needs to cure
Our work in Beckley
Beckley is about 4 miles north-east of Oxford, in Oxfordshire. Our technicians come to homes and businesses in Beckley and the surrounding area, so you don’t need to take anything anywhere. Our technicians cover all 443 towns and villages across Oxfordshire. We work right across the region, from Beckley to London (51 miles away).
Postcode districts we cover here: OX3 and OX33. That includes homes on High Street, Sandpath and New Road. Neighbouring places we cover include Stanton St John (1 mile south-east), Barton (2 miles south), Forest Hill (2 miles south-east), Risinghurst (2 miles south) and Shotover Hill (3 miles south). Further out, we also cover Oxford (4 miles south-west), Didcot (13 miles south), Bicester (8 miles north), Abingdon-on-Thames (9 miles south-west), Witney (13 miles west) and Thame (10 miles east).
Local landmarks in Beckley
Typical jobs here are in homes near Beckley Church of England Primary School, Katie and George Park and Church of the Assumption of the Blessed Virgin Mary. For rail, the closest station is Islip station, roughly 3.3 miles north-west of the centre. Nearby you will also find Oxford Castle (4.6 miles south-west) and Churchill Hospital (2.7 miles south-west). The countryside around Beckley includes Otmoor RSPB reserve and Shotover.
Common questions in Beckley
What happens once I’ve sent photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Can you fix rust around the plughole?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
When can I have a bath again?
Usually the following day. We’ll tell you the exact curing time when we finish.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens on the day
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the next day.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
- Ensure the area is dry
Get a quote
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Advice
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we can’t get to from below
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us pictures and we’ll tell you honestly.
What we work on
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
About our accreditations · Every repair comes with a one-year guarantee.
