Wirral · England
Bath chip & crack repair in Beechwood, Wirral
Fixed-price bath repair in Beechwood and the surrounding area, usually in one visit and guaranteed for a year.
- Repairs from £95
- Rust spots around the plughole
- A cracked acrylic bath
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Bath repair in Beechwood, done in place
Most of our bath repairs take a few hours, and you can generally bathe again the day after. You will not need a plumber or tiler, because the bath doesn’t move. We work on cast iron enamel, pressed steel enamel and acrylic, and the jobs we see most are cracks in an acrylic bath and damage done while the bathroom was being fitted.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Beechwood (CH43, CH49, CH46)
- Region
- Wirral
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Beechwood
We regularly work with letting and managing agents. Send the address, photos and access details.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Common problems we fix in Beechwood
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- Damage beneath the taps
Questions to ask before you book
- Whether the colour is mixed to match
- How to look after the finish
- When it can be used again
- Whether there are any call-out or travel charges
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
What you get with us
- Rooms protected and left tidy
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
Read our full price list and resurfacing vs replacement cost guide.
Honest limits
We will not take on work that won’t last, so these are the limits:
- Leaking fittings, which need a plumber
- Wear across the entire surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Common questions in Beechwood
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
What happens after I send photos?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Is a cracked acrylic bath repairable?
Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Can I get a quote without a visit?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
How much does bath repair cost in Beechwood?
Repairs from £95. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Also near Beechwood
Also in Beechwood
Our work in Beechwood
Beechwood is about 1 mile east of Moreton, in Wirral. From the centre of Beechwood to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. We cover 44 places in Wirral, from the larger towns to small villages. Our jobs stretch from Beechwood to Liverpool (7 miles away).
All of CH43, CH49 and CH46 is covered, from the main roads to the quietest streets. From Statham Road, Eleanor Road and Fenderside Road or anywhere nearby, we can come to you. Other places close to Beechwood include Upton (1 mile south-west), Claughton (1 mile east), Noctorum (1 mile south), Woodchurch (1 mile south) and Birkenhead (2 miles south-east). Within a short drive, we also cover Bebington (5 miles south-east), Heswall (4 miles south), West Kirby (4 miles south-west), Bromborough (6 miles south-east), Lower Bebington (5 miles south-east) and Spital (5 miles south-east).
What’s near Beechwood
In Beechwood, that means homes near St Paul's Catholic Primary School, The Corsair pub and Upton Hall School FCJ and the streets around them. Beechwood’s nearest station is Upton station, roughly 0.7 miles south. A little further out are Wirral Museum (2.9 miles east) and Marine Point (3.5 miles north-east). Green spaces nearby include Bidston Hill and New Brighton Marine Lake.
Aftercare tips
After the repair has cured, a few habits help it last:
- Don’t leave razors or cans standing in the bath
- Check that an acrylic bath doesn’t move when you stand in it
- Stick to mild cleaners and a soft cloth
- Rinse the bath after use, especially in hard water areas
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
What happens on the day
Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. Most jobs take two to three hours for most chips, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
Preparing for the visit
- Make sure the room can be ventilated
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
Ask for a price
If you’re in Beechwood and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
