Wirral · England

Bath chip & crack repair in Spital, Wirral

Problem with your bath in Spital? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Chips caused by builders
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Spital homes

How we handle bath repair in Spital

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. We’re frequently asked to fix holes from dropped items and a chipped rim or side, in roll-top & freestanding, pressed steel enamel and cast iron enamel.

Every repair is covered by our one-year guarantee, wherever you are in Wirral.

Bath enamel chip by the waste, filled and colour matched (before and after)
Area
Spital (CH63, CH62)
Region
Wirral
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

Questions from Spital

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Do you cover the whole of Wirral?

We work UK-wide, so Spital is covered. Our prices are the same everywhere.

Can tenants book a repair?

Yes. Check with your landlord; we can send the quote to them too.

When can I have a bath again?

Normally by the following day, though it depends on what we have done.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Spital.

Will the repair show?

We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.

Repair or replace in Spital?

Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Spital

  • Same prices wherever you are
  • A fixed quote before booking
  • Straight answers about what a repair can do
  • Everything repaired in place

Take a look at our pricing and bath cost comparison.

What we cannot put right

Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Cracks in parts of an acrylic bath we cannot get to from below
  • Wear across the whole surface, which needs re-enamelling

If in doubt, send pictures and we will say what we think.

Materials we work on in Spital

  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel

For landlords and businesses

Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

About Spital

Spital is about 1 mile west of Bebington, in Wirral. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Spital is one of 44 towns and villages in Wirral we cover.

Jobs in CH63 and CH62 are booked in the same way as anywhere else. Whether you live on Inley Road, Birch Road and Tyburn Road or anywhere nearby, a technician can come to you. Neighbouring places we cover include Poulton (1 mile south-west), Lower Bebington (1 mile north), Clatterbridge (1 mile south-west), Higher Bebington (1 mile north-west) and Brimstage (2 miles west). Further out, we also cover Birkenhead (3 miles north-west), Wallasey (6 miles north), Heswall (4 miles west), Moreton (6 miles north-west), West Kirby (7 miles west) and Greasby (6 miles north-west).

Near you in Spital

In Spital, that means homes near Wirral Grammar School for Boys, Poulton Lancelyn Primary School and Three Stags pub, among other places. Nearby too are Marfords Park (1.2 miles south), Wellington School (1 mile north) and St Andrew's Church (0.5 miles north). There’s a railway station in Spital itself: Spital station. Other landmarks nearby include Port Sunlight Museum (0.9 miles north) and Municipal Borough of Bebington (0.6 miles north). For a walk, there’s Bidston Hill and Princes Park lake.

Map of Spital © OpenStreetMap contributors

What your bath is made of matters

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

How we price bath repair

Prices start from £95. You’ll know the full cost before you book. We take into account:

  • How many areas need work
  • The colour and finish to match
  • Where the damage is and how we get to it
  • What the surface is made of

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Getting a price from photos

It only takes a minute to photograph the damage. Try to send:

  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • The material, if you know it
  • Where you are, by postcode

You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Keeping it looking good

A little care keeps the finish looking good. Our advice:

  • Fix dripping taps early to stop staining and limescale
  • Cover the bath during DIY or decorating
  • Store metal items away from the bath
  • Rinse the bath after use, especially in hard water areas

In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.

A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

When to call us in Spital

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

Common reasons people in Spital contact us are:

  • Damage done while the bathroom was being fitted
  • A hole punched through by something heavy
  • An old repair that has yellowed or come loose
  • Rust by the waste and overflow

What to look for in a quote

  • How long the guarantee is and what it covers
  • How the room is protected while they work
  • Who turns up on the day
  • How soon you can use it again

10 questions to ask before booking

How the visit works

We turn up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, typically the following day.

Getting ready for the visit

  • Ensure the area is dry
  • Mention if the room is upstairs or in a flat
  • Point us to the nearest place to park

How to get a price

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.