Somerset · England
Bath Repair for Beercrocombe homes
Problem with your bath in Beercrocombe? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
What bath repair costs
Prices start from £95. There’s no charge for travel to Beercrocombe. The price comes down to:
- Whether we combine several jobs
- What kind of damage it is
- Unusual colours or finishes
- Access to the area
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- A close-up of the damage, in focus
- A photo taken from further back
- Natural light rather than flash
- Whether it’s been repaired or coated before
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Bath repair in Beercrocombe, done in place
Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We’re often asked to fix snagging damage from a refit and an old repair that has yellowed or come loose, across pressed steel enamel, whirlpool & spa baths and cast iron enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Beercrocombe (TA3)
- Region
- Somerset
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What we do, step by step
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the following day, the bath is ready to use.
Preparing for the visit
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Read more
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Wear across the entire surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we cannot reach from underneath
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
Keeping it looking good
After the repair has cured, a few habits help it last:
- Make sure an acrylic bath is firm underfoot
- Store metal items away from the bath
- A dripping tap stains enamel, so fix it early
- Stick to mild cleaners and a soft cloth
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
When to call us in Beercrocombe
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
The things customers typically mention when they call include:
- Rust spots around the plughole
- Scuffs and scratches in the surface
- Chips on the rim or sides
- A kit repair that didn’t last
Comparing quotes
- What prep work is covered
- Whether a trained technician does the job
- How to care for the finish
- Whether the price is fixed and includes VAT
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
For anyone letting property in or around Beercrocombe, we’ll quote for several properties at once. Just send photos for each address and we’ll come back with a combined price.
About Beercrocombe
Beercrocombe is about 6 miles east of Taunton, in Somerset. Wherever you are in the TA3 postcode area, a technician comes to you. Our technicians cover all 640 towns and villages across Somerset.
Our technicians cover all of TA3. That includes homes on Beer Street and Broadmead Road. We also travel to Curry Mallet (1 mile north-east), Hatch Beauchamp (1 mile west), Stewley (1 mile south), Hatch Green (2 miles south-west) and Isle Abbotts (2 miles east). We also work in nearby towns such as Taunton (6 miles west), Bridgwater (10 miles north), Yeovil (14 miles east), Chard (7 miles south), Wellington (11 miles west) and Street (14 miles north-east).
Near you in Beercrocombe
Around Beercrocombe, we work in homes near Church of St James, The Bell Inn and Curry Mallet Church of England Primary School, among other places. Not far away are Swell Wood RSPB Nature Reserve.
Also near Beercrocombe
What else we do in Beercrocombe
FAQs for Beercrocombe
Do you come to Beercrocombe?
Yes. We work across the UK and come to Beercrocombe and the rest of Somerset. Send photos and we’ll quote, or call 0345 017 0787.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Beercrocombe.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
How long does the repair take to cure?
Typically within a day, depending on the repair.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Will I be able to see the repair?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
