Somerset · England

Shower Tray Repair for Beercrocombe homes

Shower tray repair in Beercrocombe without the cost of replacing. Get a fixed price from your pictures, then book a visit.

  • Repairs from £95
  • A tray that flexes
  • Chipped corners or rims
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Beercrocombe homes

Shower tray repair in Beercrocombe without replacing anything

If the entire tray looks tired, we can resurface it, for a clean, uniform finish. Whether it’s chips caused during fitting and scratches from cleaning or grit, we can typically put it right.

You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Location
Beercrocombe (TA3)
Region
Somerset
Guarantee
One year on every repair
Quotes
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Where we work around Beercrocombe

Beercrocombe is about 6 miles east of Taunton, in Somerset. Whether you are in the middle of Beercrocombe or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 640 towns and villages in Somerset, from the larger towns to small villages.

All of TA3 is covered, from the main roads to the quietest streets. Streets in the area include Beer Street and Broadmead Road. If you’re just outside Beercrocombe, we cover Curry Mallet (1 mile north-east), Hatch Beauchamp (1 mile west), Stewley (1 mile south), Hatch Green (2 miles south-west) and Isle Abbotts (2 miles east). Within a short drive, we also cover Taunton (6 miles west), Bridgwater (10 miles north), Yeovil (14 miles east), Chard (7 miles south), Wellington (11 miles west) and Street (14 miles north-east).

Local landmarks in Beercrocombe

In Beercrocombe, that means homes near Church of St James, The Bell Inn and Curry Mallet Church of England Primary School, among other places. For a walk, there’s Swell Wood RSPB Nature Reserve.

Map of Beercrocombe © OpenStreetMap contributors

Landlords, agents and businesses in Beercrocombe

Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What we are called out for in Beercrocombe

Most chips come from things dropped in the shower, typically on the edges or near the plughole.

You may need us if you’ve spotted:

  • Chips caused during fitting
  • A cracked shower tray
  • Staining and dullness across the tray
  • Chips on the edges

Before you book anyone

  • What preparation is included
  • How changes to the job are handled
  • Who turns up on the day
  • Is the price fixed, and does it include VAT?

How to compare quotes

Common questions in Beercrocombe

What happens if you find more damage?

Your quote covers the damage in the photos. If there’s more, we will tell you before starting.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders across Somerset.

Can you repair something that is been repaired before?

Most of the time. Tell us what was done before.

Is it OK to use a cracked tray?

Not until you know the crack isn’t letting water through. Check the ceiling below for damp.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you resurface a whole tray?

Yes. We can resurface the whole tray for a fresh finish without removing it.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

When can you do it?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

Should you replace it?

The tray is usually the last thing fitted and the first thing tiled up to, so taking one out disturbs a lot. A repair keeps everything as it is. Our shower tray repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why us?

  • Rooms protected and left tidy
  • Nothing taken out or refitted
  • Colours mixed by hand to suit your surface
  • CHAS and Constructionline accredited

Read our pricing.

Materials and what they mean for the repair

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so it’s worth repairing early.

Acrylic

Acrylic trays are lighter and slightly flexible, so good support matters. Cracks and scratches can be repaired.

How to care for the repair

Nothing complicated is needed:

  • Store bottles off the tray
  • Keep harsh chemicals off the tray
  • Check the seal every few months
  • Rinse away soap after showering

Rinse the tray after use, clean with mild cleaners, and keep the sealant in good condition so water cannot get underneath.

A small crack lets in a little water every time you shower, which can damage the floor over time. Getting it repaired quickly is much cheaper than fixing a floor.

What we cannot put right

Some jobs aren’t right for a repair, including:

  • Movement caused by a poor base, until the support is fixed
  • Rotten or damaged flooring underneath
  • Leaking waste fittings

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Stone resin
  • Cast iron
  • Acrylic
  • Enamelled steel
  • Ceramic

What happens on the day

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, or most of the day to resurface the whole tray, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. First, we check whether the tray moves.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour matched and finished.
  5. It’s left to cure, normally until the following day.

Getting ready for the visit

  • Let us know about parking or access
  • Tell us if there are stairs or a lift
  • Clear the area around the damage

Get a quote

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.

Get a fixed quote

Related advice

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.