Gloucestershire · England
Bath Repair for Bentham homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bentham, with a one-year guarantee on every repair.
- Repairs from £95
- Rust spots around the plughole
- Impact holes in acrylic
Should I try a DIY kit first?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Bath repair in Bentham, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you are dealing with scuffs and scratches in the surface and damage done while the bathroom was being fitted, we can help, on roll-top & freestanding, pressed steel enamel and cast iron enamel alike.
Every repair comes with our one-year guarantee.
- Location
- Bentham (GL3)
- Region
- Gloucestershire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath repair
Prices start from £95. There is no charge for travel to Bentham. The price comes down to:
- The material
- Access to the area
- The type of damage
- How much damage there is
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Send pictures for a quote
Most quotes are done from photos alone. To help us price it:
- A photo taken from further back
- Natural light rather than flash
- One sharp close-up of the damage
- What it’s made of, if you know
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Keeping it looking good
So the finish stays in good condition for years:
- Store metal items away from the bath
- Rinse the bath after use, especially in hard water areas
- Put a towel in the bath if you are working above it
- Make sure an acrylic bath is firm underfoot
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
Do you need bath repair in Bentham?
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
It’s worth getting a quote if you see:
- Rust spots around the plughole
- Damage done while the bathroom was being fitted
- A kit repair that didn’t last
- Scuffs and scratches in the surface
Questions to ask before booking
- Whether the colour is mixed to match
- What aftercare is recommended
- How changes to the job are handled
- Who will actually do the work
Bentham questions
Do you cover Bentham?
Yes. We cover the entire UK and travel to Bentham. Send us photos for a fixed quote, or call 0345 017 0787.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. Then we’ll agree a date.
Do you charge for travel?
There is no separate call-out charge. The fixed price covers the visit and the work.
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
About Bentham
Bentham is about 2 miles east of Brockworth, in Gloucestershire. Our technicians come to homes and businesses in Bentham and the surrounding area, so nothing has to leave your home. Bentham is one of 470 towns and villages in Gloucestershire we cover. Our nearest city page is Birmingham, about 44 miles away.
Our visits in GL3 work the same way as everywhere else we cover. Nearby, we also work in Little Shurdington (1 mile north), Little Witcombe (1 mile south-west), Birdlip (1 mile south), Shurdington (1 mile north) and Brockworth (2 miles west). We also work in nearby towns such as Cheltenham (4 miles north-east), Gloucester (5 miles west), Stroud (8 miles south-west), Tewkesbury (10 miles north), St Paul's (4 miles north-east) and Cirencester (11 miles south-east).
What’s near Bentham
Our clients here include homes close to Church of St Peter, Henley Bank High School and Shurdington Church of England Primary School, among other places. For rail, the closest station is Cheltenham Spa station, roughly 3.6 miles north of the centre. Further afield, we also cover the area around Emmas Grove (1 mile east) and Cheltenham College Museum (3.7 miles north-east). Green spaces nearby include Cooper's Hill.
What a repair cannot fix
Before booking, it’s worth knowing the limits:
- Wear across the whole surface, which needs re-enamelling
- Cracks in acrylic we can’t reach from underneath
- A bath that moves underfoot, until its support is fixed
Send us photos and we’ll tell you honestly.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
What else we do in Bentham
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a few hours, depending on the damage in most cases. We leave the room clean.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the day after.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Get a quote
Email us a picture of the damage and one of the whole item, and tell us you’re in Bentham, and we will come back with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
