Gloucestershire · England
Bath Repair for Cirencester homes
Our repair technicians come to Cirencester for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- A chip where the taps sit
- Snagging damage from a refit
About Cirencester
Cirencester is about 12 miles east of Stroud, in Gloucestershire. Clients in Cirencester get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. We cover 470 places in Gloucestershire, from the larger towns to small villages. We work right across the region, from Cirencester to Birmingham (52 miles away).
Every address in GL7 is covered. From Market Place, Parkland Square and London Road or anywhere nearby, a technician can come to you. Being close to the A417 and A419, Cirencester is easy for our technicians to reach. Neighbouring places we cover include Chesterton (1 mile south-west), Preston (1 mile south-east), Baunton (1 mile north), Stratton (1 mile north) and Bagendon (3 miles north). We also work in nearby towns such as Cheltenham (14 miles north), Gloucester (15 miles north-west), Stroud (12 miles west), St Paul's (14 miles north), Lansdown (14 miles north) and Fairview (14 miles north). Cirencester is among the bigger towns we cover in Gloucestershire.
Local landmarks in Cirencester
Our clients here include homes close to Church of the Holy Trinity, Cirencester Primary School and Cirencester Kingshill School and the streets around them. For rail, the closest station is Kemble station, about 3.5 miles south-west of the centre. Further afield, we also cover the area around Corinium Museum (less than half a mile north-west) and Cirencester Castle (under half a mile north-west).
About our bath repair in Cirencester
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s a chipped rim or side and scuffs and scratches in the surface, we can help, whatever the material.
All of our repairs are guaranteed for twelve months in Cirencester and everywhere else. If something goes wrong with the work, we come back.
- Location
- Cirencester (GL7)
- Area hub
- Gloucestershire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour matched, in much the same way.
Should you replace it?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Cirencester clients choose us
- Most jobs done in one visit
- Every repair guaranteed for a year
- A fixed quote before you book
- Straight answers about what a repair can do
See our pricing or bath cost comparison.
Questions from Cirencester
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
Are there extra charges for Cirencester?
We don’t add a call-out fee. Your fixed quote includes everything.
Can a cracked acrylic bath be fixed?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Keep metal cans and razors off the surface
- Have new chips seen to early
- Rinse it down after each bath
- Don’t scrub with anything abrasive
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
More services for Cirencester
Do you need bath repair in Cirencester?
Heavy toiletries are the biggest single cause of chips, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Most people get in touch when they notice something like this:
- Cracks in an acrylic bath
- Damage done while the bathroom was being fitted
- Chips on the rim or sides
- Scuffs and scratches in the surface
Comparing quotes
- How the room is protected while they work
- The length of the guarantee and what it covers
- How to care for the finish
- Whether a trained technician does the job
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
What we can’t put right
We won’t take on work that won’t last, so these are the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before you book.
Surfaces we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which normally takes a few hours. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
How to prepare
- Move bottles, mats and clutter away from the area
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
Get a quote
For a price in Cirencester, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Landlord and trade work in Cirencester
We regularly work with letting and managing agents. Send the address, photos and access details and we will arrange it.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About our accreditations · Every repair comes with a one-year guarantee.
