Somerset · England
Bath Repair for Berkley homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Berkley, carried out at your home and guaranteed for a year.
- Repairs from £95
- An old repair that has yellowed or come loose
- Scuffs and scratches in the surface
Bath repair in Berkley without replacing anything
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day. Our repair technicians work on cast iron enamel, whirlpool & spa baths and roll-top & freestanding, and common reasons people get in touch are damage beneath the taps and scuffs and scratches in the surface.
You’re covered for a year from the day of the repair. Just call us if there is a problem and we will sort it.
- Where
- Berkley (BA11)
- Area hub
- Somerset
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath repair in Berkley
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Get in touch if you’ve noticed:
- Impact holes in acrylic
- Chips along the edge of the bath
- Chips caused by builders
- Rusty patches near the plughole
What your quote should include
- A fixed quote, and whether VAT is included
- Whether the colour is mixed to match
- The length of the guarantee and what it covers
- What aftercare is recommended
The process
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will take it from there. Most visits take a few hours, depending on the damage, tidy-up included.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the day after.
Preparing for the visit
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
- Move bottles, mats and clutter away from the area
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Landlords, agents and businesses in Berkley
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Where we work around Berkley
Berkley is about 2 miles east of Frome, in Somerset. Jobs in Berkley are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our repair technicians cover all 640 towns and villages in Somerset.
Here we cover the BA11 postcode area. We also cover the places around Berkley: Berkley Marsh (1 mile west), Standerwick (1 mile north-east), Chapmanslade (1 mile south-east), Beckington (2 miles north) and Short Street (2 miles east). Further out, we also cover Midsomer Norton (9 miles west), Shepton Mallet (12 miles west), Radstock (8 miles north-west), Wincanton (14 miles south-west), Castle Cary (15 miles south-west) and Westfield (8 miles north-west).
Near you in Berkley
In Berkley, that means homes near North Hill House School, Church of St Mary and Frome Flyer pub, among other places. Other local landmarks include Thoulstone Park (2 miles east) and Berkley Church of England First School (within half a mile north-east). The nearest railway station is Frome station, about 1.8 miles south-west. Well-known places in the area include The Woodland Heritage Museum (2.8 miles north-east) and Nunney Castle (4.9 miles south-west). Not far away are Orchardleigh Lake and Cley Hill.
FAQs for Berkley
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Which areas do you work in?
We cover the entire UK, including Berkley and the rest of Somerset. Just include your postcode and we’ll confirm dates.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Is a bath repair durable?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
How do I get a price for bath repair in Berkley?
Repairs from £95. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Nearby places to Berkley
Other services in Berkley
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Check that an acrylic bath does not move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
- Have new chips seen to early
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Why repair rather than replace?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Why us?
- One visit for most repairs
- Colour-matched on site
- Work done at your home or business
- Honest advice, even when it means no job
Read our pricing and bath cost comparison.
Prices and what affects them
Prices start from £95. You will not pay by the hour. The price is based on:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- The material and finish
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- A photo taken from further back
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Natural light rather than flash
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
What we can’t put right
It helps to know what we can’t do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in acrylic we cannot reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
