Somerset · England
Bath Repair in Radstock
Bath repair for Radstock, without a refit. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- Scuffs and scratches in the surface
- A kit repair that didn’t last
About our bath repair in Radstock
A damaged bath does not have to mean a new bathroom. Our technicians fill, shape and refinish the damage, mixing the colour on the day. We regularly repair pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and people most frequently call us about a failed DIY repair that’s discoloured or lifting and rust spots around the plughole.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Area
- Radstock (BA3)
- Region
- Somerset
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Questions from Radstock
What does bath repair cost?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
What areas do you cover?
The entire UK, including all of Somerset. Just include your postcode and we will offer you dates.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
What about rust by the waste?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Is there a call-out fee?
We don’t add a call-out fee. Your fixed price includes everything.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Is there any odour?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
What a repair can’t fix
In fairness, there are a few things a repair won’t fix:
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we can’t reach from underneath
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Common problems we fix in Radstock
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. We repair snagging damage like this regularly.
If you can see any of these, send us a picture:
- Snagging damage from a refit
- A chipped rim or side
- Chips under the taps
- Hairline or through cracks in acrylic
Comparing quotes
- Whether cleaning and preparation are in the price
- When it can be used again
- A fixed quote, and whether VAT is included
- How the room is protected while they work
Where we work around Radstock
Radstock is about 7 miles north-west of Frome, in Somerset. Jobs in Radstock are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Radstock is one of 640 places in Somerset where we work.
Every address in BA3 is covered. From Wells Square, The Street and The Dring or a nearby road, a technician can come to you. You’ll find Radstock on the A362 and A367, so it’s easy for us to reach. Other places close to Radstock include Westfield (1 mile east), Haydon (1 mile south-east), Writhlington (1 mile east), Midsomer Norton (1 mile west) and Lower Writhlington (1 mile east). Larger places within reach include Frome (7 miles south-east), Wells (10 miles south-west), Shepton Mallet (8 miles south-west), Glastonbury (15 miles south-west), Cheddar (14 miles west) and Castle Cary (14 miles south).
Near you in Radstock
Our clients here include homes close to St Nicholas CofE Primary, The Railway Public House and Parish Church of St Nicholas. Well-known places in the area include Paulton Memorial Hospital (1.8 miles west). Green spaces nearby include Stephen's Vale Nature Reserve and Lechmere Water.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Aftercare tips
So the finish stays in good condition for years:
- Cover the bath during DIY or decorating
- Clean with warm water and a mild detergent
- Get any new chip repaired before it rusts
- Avoid scourers, wire wool and gritty cream cleaners
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Prices and what affects them
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- The size and number of damaged areas
- Access to the area
Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
What else we do in Radstock
Repair or replace: which is better?
A new bath brings a chain of other jobs: the tiles sitting on the rim tend to break, a new panel is often needed, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Why Radstock customers choose us
- No need to remove anything
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
- Colours mixed by hand to suit your surface
See our prices page and resurfacing vs replacement cost guide.
Landlord and trade work in Radstock
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What we do, step by step
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes two to three hours for most chips. The room is left tidy and you’ll know when it can be used.
- First, we check the damage against your photos and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Let us know about parking or access
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
