Nottingham · England

Bath Repair in Bestwood St Albans

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Bestwood St Albans and across Nottingham. Send photos for a free, fixed quote.

  • Repairs from £95
  • A hole punched through by something heavy
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Bestwood St Albans

How we handle bath repair in Bestwood St Albans

Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. We work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and common reasons people get in touch are chips under the taps and a kit repair that didn’t last.

We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.

Rusty chip next to a bath plughole, before and after repair
Where
Bestwood St Albans (NG6)
County
Nottingham
Warranty
A year, on every repair
Price
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Last updated
23 October 2026

Why repair rather than replace?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. We charge the same wherever you are, so there is no premium for Bestwood St Albans. The job itself decides the price: the material, the amount of damage and how many items.

Why book with us

  • Colour-matched on site
  • A year’s guarantee on all work
  • Work done at your home or business
  • CHAS and Constructionline accredited

Read our pricing and bath cost comparison.

Common problems we fix in Bestwood St Albans

A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.

Clients normally contact us about:

  • Holes from dropped items
  • Rusty patches near the plughole
  • A chip where the taps sit
  • Deep scratches in acrylic

What to look for in a quote

  • What happens if they find more damage
  • How soon you can use it again
  • Whether they match the colour on site
  • How your room will be protected

How to compare quotes

Bestwood St Albans and the surrounding area

Bestwood St Albans is about 2 miles east of Hucknall, in Nottingham. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Bestwood St Albans is one of 51 places in Nottingham we cover. We work right across the region, from Bestwood St Albans to Birmingham (50 miles away).

Postcode districts we cover here: NG6. From Squires Drive, Lewis Way and Johnsons Way or a nearby road, a technician can come to you. Other places close to Bestwood St Albans include Bestwood Village (1 mile south-west), Red Hill (1 mile south-east), Warren Hill (1 mile south), Butler's Hill (2 miles west) and Rise Park (2 miles south-west). We also work in nearby towns such as Nottingham (4 miles south), Bulwell (3 miles south-west), Sneinton (5 miles south), St Ann's (5 miles south), Clifton (9 miles south) and The Park Estate (6 miles south).

Landmarks near Bestwood St Albans

Our customers here include homes close to Bestwood Country Park, Hawthorne Primary and Nursery School and The Oakwood Academy, among other places. Bestwood St Albans’s nearest station is Hucknall station, roughly 1.9 miles west. Further afield, we also cover the area around Greasley Castle (4.9 miles west) and Nottingham City Hospital (2.8 miles south).

Map of Bestwood St Albans © OpenStreetMap contributors

How the visit works

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and let you know when you can use it again.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Make sure the room can be ventilated
  • Let us know which floor the room is on
  • Keep children and pets away from the room on the day

Ask for a price

Upload pictures of the damage and a wider shot of the whole item, with your NG6 postcode, and we will come back with a fixed quote.

Get a free quote

Read more

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Stick to mild cleaners and a soft cloth
  • Fix dripping taps early to stop staining and limescale
  • Keep metal cans and razors off the surface

Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.

If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.

What a repair can’t fix

It helps to know what we can’t do too:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • Wear across the whole surface, which needs re-enamelling
  • A bath that moves underfoot, until its support is fixed

If in doubt, send photos and we will say what we think before booking.

Surfaces we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic
  • Pressed steel enamel
  • Whirlpool & spa baths

DIY repairs versus a professional job

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

Landlord and trade work in Bestwood St Albans

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Bestwood St Albans as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.

What affects the price in Bestwood St Albans

Repairs from £95. There is no area surcharge for Bestwood St Albans. The price reflects:

  • The material
  • How easy the damage is to reach
  • The type of damage
  • How much damage there is

Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.

Getting a price from photos

You can take the photos on your phone. Ensure they show:

  • The material, if you know it
  • One picture of the whole bath
  • One sharp close-up of the damage
  • Details of any past repairs

You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Bestwood St Albans: your questions answered

Is a holed acrylic bath repairable?

Normally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.

Is it worth repairing rather than replacing?

Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you repair coloured baths?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Can pets and children be at home?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

When can I have a bath again?

Generally the day after. We’ll tell you the exact curing time when we finish.

What happens next?

You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.