Nottingham · England
Bath Repair for Warren Hill homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Warren Hill and across Nottingham. Free, fixed quotes from your photos.
- Repairs from £95
- Deep scratches in acrylic
- Rust spots around the plughole
Bath repair in Warren Hill, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can generally use the bath the day after. Whether it’s an old repair that has yellowed or come loose and rust spots around the plughole, we can usually put it right, whatever the material.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Warren Hill (NG5)
- County
- Nottingham
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
How to prepare
- Keep a parking space free if you can
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
Getting a price
Most clients in Warren Hill get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Warren Hill and the surrounding area
Warren Hill is about 2 miles north-east of Bulwell, in Nottingham. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 51 places in Nottingham. Our jobs stretch from Warren Hill to Birmingham (about 48 miles away).
Jobs in NG5 are booked in the same way as anywhere else. Local streets include Lambeth Road, Pavilion Road and Finsbury Road, all of which we cover. Neighbouring places we cover include Rise Park (1 mile west), Bestwood Village (1 mile north-west), Top Valley (1 mile south-west), Bestwood St Albans (1 mile north) and Red Hill (1 mile east). Within a short drive, we also cover Nottingham (3 miles south), Sneinton (4 miles south), St Ann's (4 miles south), Clifton (8 miles south), The Park Estate (4 miles south) and New Basford (3 miles south).
Local landmarks in Warren Hill
Around Warren Hill, we work in homes near Bestwood Country Park, Emmanuel Church and Warren Primary Academy and the streets around them. The closest station to Warren Hill is Bulwell station, about 1.7 miles south-west. Nearby you will also find Nottingham Castle (4.4 miles south) and Nottingham City Hospital (1.5 miles south). Open spaces near Warren Hill include Colwick Woods.
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
Send us photos and we will tell you honestly.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We work for landlords, letting agents and housing providers in Warren Hill as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
What we are called out for in Warren Hill
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Typical reasons for a call-out include:
- Hairline or through cracks in acrylic
- Snagging damage from a refit
- Scuffs and scratches in the surface
- Rusty patches near the plughole
Comparing quotes
- The length of the guarantee and what it covers
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- How soon you can use it again
Common questions in Warren Hill
How long does the repair take to cure?
Generally within a day, though it depends on what we have done.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
I tried a repair kit. Can you fix it?
Yes. We remove the old filler and start again. Mention it when you send photos.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you do more than one item on the same visit?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
Nearby places to Warren Hill
More services for Warren Hill
How to look after the repair
Most damage we see is avoidable. These habits help:
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
- Get any new chip repaired before it rusts
- Stick to mild cleaners and a soft cloth
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Can I fix it myself?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
How we price bath repair
Repairs from £95. We charge the same across the UK, including Warren Hill. What changes the price is:
- The material and finish
- Doing more than one item at once
- The colour and finish to match
- The type of damage
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- Details of any past repairs
- The material, if you know it
- Where you are, by postcode
- A close-up of the damage, in focus
Send us a picture of the damage and one of the whole item, with your NG5 postcode, and we’ll reply with a fixed price.
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
About our accreditations · Every repair comes with a one-year guarantee.
