Isle of Anglesey · Wales
Bath chip & crack repair in Bethel, Isle of Anglesey
Fixed-price bath repair in Bethel and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rusty patches near the plughole
When to call us in Bethel
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
The most common problems we are called about are:
- Chips on the rim or sides
- Impact holes in acrylic
- A failed DIY repair that’s discoloured or lifting
- Rust by the waste and overflow
What to look for in a quote
- The length of the guarantee and what it covers
- Whether the price covers travel
- A fixed quote, and whether VAT is included
- How soon you can use it again
Bath repair at your home in Bethel
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. Our technicians work on pressed steel enamel, acrylic and cast iron enamel, and people most often call us about rust spots around the plughole and chips caused by builders.
The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.
- Location
- Bethel (LL62)
- Region
- Isle of Anglesey
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlords, agents and businesses in Bethel
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Bethel use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Covering Bethel
Bethel is about 7 miles north-west of Caernarfon, in Isle of Anglesey. Across the LL62 area, a technician comes to you. Bethel is one of 115 towns and villages in Isle of Anglesey we cover. Our jobs stretch from Bethel to Liverpool (about 62 miles away).
Our visits in LL62 work the same way as everywhere else we cover. Nearby, we also work in Trewalchmai (3 miles north), Gwalchmai Uchaf (3 miles north), Gwalchmai (4 miles north), Bryn Du (4 miles west) and Llanfaelog (4 miles west). Further out, we also cover Holyhead (12 miles north-west), Blackbridge (12 miles north-west), Porth-y-Felin (12 miles north-west), Llangefni (5 miles north-east), Menai Bridge (10 miles east) and Stryd (12 miles north-west).
Landmarks near Bethel
Typical jobs here are in homes near Capel Bethel, Ysgol Gymuned Bodorgan and Parc Henbias. The closest station to Bethel is Bodorgan station, roughly 0.7 miles south-west. Further afield, we also cover the area around Aberffraw llys and Motte (2.9 miles south-west) and Tacla Taid Transport And Agriculture Museum (3.3 miles south-east). Not far away are The Dingle and Cefncwmwd.
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Allow a few hours. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the next day.
How to prepare
- Ensure the room can be ventilated
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
How to get a price
To get a price, send a couple of photos using our quote form or ring us. We’ll say straight away if a repair is the right fix.
Related advice
More services for Bethel
How we price bath repair
Repairs from £95. We don’t charge extra for travel to Bethel. The price depends on:
- Any earlier repairs that need removing first
- What the surface is made of
- The type of damage
- Unusual colours or finishes
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- A clear, close picture of the problem area
- Natural light rather than flash
- Details of any past repairs
- What it’s made of, if you know
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Your questions about bath repair in Bethel
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Do the materials smell?
Expect a mild smell while we’re working, which fades afterwards.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you quote from photos?
Typically, yes. Clear pictures let us give you a fixed price without visiting.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Cracks in acrylic we cannot reach from underneath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- A dripping tap stains enamel, so fix it early
- Do not leave razors or cans standing in the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- If an acrylic bath flexes, have its feet adjusted
There is nothing special to do after a repair, just sensible cleaning. Skip bleach and gritty creams and rinse after use.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Take it off before we arrive.
Repairs by material
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
