Somerset · England
Bath Repair in Bicknoller
Bath repair across Bicknoller and nearby, usually in one visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- A kit repair that didn’t last
What happens on the day
We agree an arrival time beforehand. On site, it takes two to three hours for most chips in most cases. We leave the room clean and ready to use once it has cured.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
How to get a price
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
How we handle bath repair in Bicknoller
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We work on pressed steel enamel, roll-top & freestanding and cast iron enamel, and common reasons people contact us are damage done while the bathroom was being fitted and chips along the edge of the bath.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Bicknoller (TA4)
- Region
- Somerset
- Cover
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Bicknoller
How long before I can use the bath?
Typically the day after. We will tell you the exact curing time when we finish.
Do you come to Bicknoller?
Yes. We cover the entire UK and travel to Bicknoller and the rest of Somerset. Send pictures and we’ll quote, or call 0345 017 0787.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
What areas do you cover?
We work UK-wide, and that includes Bicknoller. Prices don’t change with location.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
What happens once I’ve sent photos?
You’ll get a fixed quote back. You’re under no obligation.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
When a repair isn’t the answer
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Wear across the whole surface, which needs re-enamelling
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
Common problems we fix in Bicknoller
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The most common problems we are called about are:
- Chips on the rim or sides
- A failed DIY repair that is discoloured or lifting
- Impact holes in acrylic
- A cracked acrylic bath
Before you book anyone
- What prep work is covered
- What protection goes down before work starts
- How changes to the job are handled
- When it can be used again
Looking after it afterwards
To keep it looking its best for years:
- Store metal items away from the bath
- Rinse it down after each bath
- Do not leave a fresh chip for long
- Cover the bath during DIY or decorating
Don’t leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Also near Bicknoller
What else we do in Bicknoller
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams in Somerset and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
About Bicknoller
Bicknoller is about 10 miles south-east of Minehead, in Somerset. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We cover all 640 towns and villages in Somerset.
Every address in TA4 is covered. From Gatchells Lane, Dashwoods Lane and Church Lane or a nearby road, we can come to you. Other places close to Bicknoller include Newton (1 mile south), Culverhays (1 mile south), Vellow (1 mile south-west), Kingswood (1 mile south) and Higher Halsway (1 mile south-east). Within a short drive, we also cover Taunton (12 miles south-east), Bridgwater (12 miles east), Minehead (10 miles north-west), Burnham-on-Sea (14 miles north-east), Wellington (12 miles south) and Sydenham (13 miles east).
Local landmarks in Bicknoller
Around Bicknoller, we work in homes near Church of St George and Bicknoller Inn, among other places. Further afield, we also cover the area around Bakelite Museum (2.4 miles west). Open spaces near Bicknoller include Wills Neck.
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, making good the tiles and panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Our bath repair starts from £95. We charge the same wherever you are, with no extra for Bicknoller. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Bicknoller clients choose us
- Colour mixed on the day to match
- We will tell you if it’s not worth repairing
- One-year guarantee on every repair
- Same prices wherever you are
Take a look at our pricing and bath cost comparison.
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
What bath repair costs
Prices start from £95. You’ll know the full cost before booking. We look at:
- What the surface is made of
- How many areas need work
- Previous DIY repairs that have to come out
- How easy the damage is to reach
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed quote
Two or three clear photos are normally enough. It helps if you send:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- The material, if you know it
- A wider photo showing the entire bath
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
About our accreditations · Every repair comes with a one-year guarantee.
