Somerset · England
Bath Repair for Culverhays homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Culverhays, with a one-year guarantee on every repair.
- Repairs from £95
- A hole punched through by something heavy
- Rusty patches near the plughole
How we handle bath repair in Culverhays
Most of our bath repairs take a few hours, and you can normally bathe again the day after. You won’t need a plumber or tiler, because the bath does not move. Whether it’s scratches you can feel with a fingernail and a kit repair that didn’t last, we can generally put it right, whatever the material.
Big or small, you get the same one-year guarantee in Culverhays and across Somerset.
- Location
- Culverhays (TA4)
- Region
- Somerset
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Culverhays
Prices start from £95. There’s no area surcharge for Culverhays. The price reflects:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Doing more than one item at once
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
A couple of clear pictures is all it takes. It helps if you send:
- What it’s made of, if you know
- A wider photo showing the entire bath
- Your postcode, so we can check dates
- One sharp close-up of the damage
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you are under no obligation.
Repair or replace: which is better?
Replacing a fitted bath generally means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. A repair fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
Read our pricing and bath cost comparison.
Repairs by material
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Culverhays: your questions answered
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
How do I get a price for bath repair in Culverhays?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
What happens once I’ve sent photos?
You will get a fixed quote back, typically with dates to choose from. You’re under no obligation.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Where we work around Culverhays
Culverhays is about 10 miles south-east of Minehead, in Somerset. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Our technicians cover all 640 towns and villages in Somerset, from the larger towns to small villages.
Here we cover the TA4 postcode area. Other places close to Culverhays include Newton (1 mile north-west), Kingswood (1 mile south-west), Bicknoller (1 mile north), Stogumber (1 mile south-west) and Vellow (1 mile west). Within a short drive, we also cover Taunton (11 miles south-east), Bridgwater (12 miles east), Minehead (10 miles north-west), Burnham-on-Sea (14 miles north-east), Wellington (11 miles south) and Sydenham (13 miles east).
Landmarks near Culverhays
Our customers here include homes close to Bicknoller Inn, Church of St George and Stogumber CofE Primary School and the streets around them. Other landmarks nearby include Bakelite Museum (2.8 miles north-west). Not far away are Wills Neck.
How it works
We turn up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take a morning or an afternoon, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Let us know if it has been repaired before
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
How to get a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Aftercare tips
Once the work has cured, treat it gently:
- Do not leave a fresh chip for long
- Don’t scrub with anything abrasive
- Store metal items away from the bath
- Check that an acrylic bath doesn’t move when you stand in it
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Honest limits
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- A steel bath rusted through
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Landlord and trade work in Culverhays
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Places near Culverhays
Other services in Culverhays
About our accreditations · Every repair comes with a one-year guarantee.
