Lancashire · England
Bath chip & crack repair in Bilsborrow, Lancashire
Problem with your bath in Bilsborrow? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A cracked acrylic bath
- Scuffs and scratches in the surface
How we handle bath repair in Bilsborrow
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include holes from dropped items and chips on the rim or sides, across acrylic, cast iron enamel and roll-top & freestanding.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Bilsborrow (PR3)
- County
- Lancashire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Bilsborrow?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. Our prices are the same across the UK, so there’s no premium for Bilsborrow. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- A fixed quote before booking
- Nothing taken out or refitted
See our prices page or guide to resurfacing and replacement costs.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take two to three hours for most chips. We clean up when we are done and let you know when you can use it again.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
- Ensure the area is dry
Get a quote
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Landlords, agents and businesses in Bilsborrow
If you manage property in Bilsborrow, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
We regularly work with letting and managing agents. Send the address, pictures and access details.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Flexing caused by a failed cradle or loose feet
- A bath worn all over, where resurfacing makes more sense
- A steel bath rusted through
If in doubt, send photos and we will say what we think.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
- Cast iron enamel
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
How we price bath repair
Prices start from £95. Every quote is fixed and free. What we look at:
- How much damage there is
- Whether we combine several jobs
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Send photos for a quote
We price nearly every job from pictures. This is what we need:
- A close-up of the damage, in focus
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Towns and villages near Bilsborrow
More services for Bilsborrow
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Do not leave razors or cans standing in the bath
- Check that an acrylic bath does not move when you stand in it
- Put a towel in the bath if you are working above it
- Rinse the bath after use, especially in hard water areas
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
Tape over a fresh chip or crack until it’s repaired, so water can’t get in. Remove it before the repair.
Our work in Bilsborrow
Bilsborrow is about 5 miles north of Fulwood, in Lancashire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Bilsborrow is one of 482 towns and villages in Lancashire where we work. Our jobs stretch from Bilsborrow to Liverpool (32 miles away).
Our visits in PR3 are booked in the same way as anywhere else. We regularly work on streets such as Ballot Hill Crescent, Church Lane and Beacon Close and the roads around them. Other places close to Bilsborrow include Myerscough (1 mile west), Matshead (1 mile north-east), Barton (2 miles south), Cuddy Hill (2 miles south-west) and Stubbins (2 miles north). We also work in nearby towns such as Preston (6 miles south), Lancaster (14 miles north), Chorley (15 miles south), Lytham St Anne's (13 miles south-west), Bamber Bridge (9 miles south) and Morecambe (15 miles north).
What’s near Bilsborrow
We visit homes around St Hilda's Church, Owd Nell's Tavern and Bilsborrow John Cross Church of England Primary School and the streets around them. Further afield, we also cover the area around Greenhalgh Castle (3.3 miles north) and Church Cottage (3.6 miles south). The countryside around Bilsborrow includes Beacon Fell.
Your questions about bath repair in Bilsborrow
Are there extra charges for Bilsborrow?
We do not add a call-out fee. Your fixed quote includes everything.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Will I be able to see the repair?
On a glossy bath, you’ll struggle to find it. On worn enamel, it can look shinier than the rest.
Can you repair a crack in an acrylic bath?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. The hole is backed, filled and refinished to match.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
