Lancashire · England
Bath Repair for Cuddy Hill homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Cuddy Hill, carried out at your home and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
Bath repair in Cuddy Hill, done in place
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We work on whirlpool & spa baths, roll-top & freestanding and cast iron enamel, and common reasons people contact us are a cracked acrylic bath and deep scratches in acrylic.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Cuddy Hill (PR4)
- County
- Lancashire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When a repair is not the answer
A repair isn’t always the answer, and we’ll tell you before we start. Repairs won’t solve:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
How to prepare
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
Get a quote
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Read more
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
What you get with us
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- Same prices wherever you are
- Dust sheets down, tidy finish
See our pricing or bath cost comparison.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Give the bath a quick rinse after use
- Store metal items away from the bath
- Fix dripping taps early to stop staining and limescale
- Don’t scrub with anything abrasive
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Towns and villages near Cuddy Hill
Other services in Cuddy Hill
Should I try a DIY kit first?
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
How we price bath repair
Repairs from £95. We don’t charge extra for travel to Cuddy Hill. The price comes down to:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- How much damage there is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what helps:
- What it’s made of, if you know
- One picture of the whole bath
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
To get a price, send two or three photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Common questions in Cuddy Hill
Can you match an avocado or pink bath?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
I tried a repair kit. Can you fix it?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
What happens after I send pictures?
We come back with a fixed price. You’re under no obligation.
Can a cracked acrylic bath be fixed?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Will the repair last?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Cuddy Hill and nearby
Cuddy Hill is about 4 miles north-west of Fulwood, in Lancashire. We agree a date that works for you, and we will give you an arrival time in advance, so there’s no waiting around. Our technicians cover 482 places in Lancashire, from the larger towns to small villages. We work right across the region, from Cuddy Hill to Liverpool (30 miles away).
Postcode districts we cover here: PR4. Whether you live on Benson's Lane and Eaves Lane or a nearby road, a technician can come to you. We also travel to Black Pole (1 mile south), Lewth (1 mile south-west), Newsham (1 mile south-east), Woodsfold (1 mile south-west) and Barton (1 mile east). We also work in nearby towns such as Preston (5 miles south-east), Lancaster (15 miles north), Chorley (14 miles south-east), Lytham St Anne's (11 miles south-west), Bamber Bridge (8 miles south-east) and Leyland (10 miles south).
What’s near Cuddy Hill
Our customers here include homes close to The Plough at Eaves pub and Broughton High School, among other places. The nearest railway station is Salwick station, roughly 4.1 miles south-west. Further afield, we also cover the area around Royal Preston Hospital (3.7 miles south-east) and Greenhalgh Castle (4.6 miles north).
Work for landlords and builders
If you manage property in Cuddy Hill, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
We work for landlords, letting agents and housing providers in Cuddy Hill as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
About our accreditations · Every repair comes with a one-year guarantee.
