Warwickshire · England
Bath Repair for Binton homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Binton. Free, fixed quotes from your pictures.
- Repairs from £95
- Chips under the taps
- A chipped rim or side
Bath repair in Binton, done in place
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. Most baths can be used again the day after. Common call-outs are for snagging damage from a refit and a chipped rim or side, across acrylic, roll-top & freestanding and cast iron enamel.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Area
- Binton (CV37)
- Area hub
- Warwickshire
- Cover
- A year, on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Binton questions
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
How long does the repair take to cure?
Usually the day after. We confirm the time before we leave.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do you cover the whole of Warwickshire?
The whole UK, including all of Warwickshire. Just include your postcode and we will confirm dates.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
What does bath repair cost?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Places near Binton
What else we do in Binton
Landlord and trade work in Binton
We carry out planned and one-off repairs for housing associations and facilities teams in Warwickshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Landlords, letting agents and housing providers in Binton use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
About Binton
Binton is about 3 miles west of Stratford-upon-Avon, in Warwickshire. Book a date that suits you, and you will know when to expect us, so there’s no waiting around. Binton is one of 324 towns and villages in Warwickshire we cover. We work right across the region, from Binton to Birmingham (about 20 miles away).
Our technicians cover all of the CV37 postcode area and the streets around it. You’ll find streets such as Main Road, Field View and Binton Hill, and we cover them all. Close by, we cover Welford-on-Avon (1 mile south), Weston-on-Avon (2 miles south-east), Luddington (2 miles south-east), Shottery (3 miles east) and Clifford Chambers (3 miles east). Larger places within reach include Warwick (11 miles north-east), Royal Leamington Spa (13 miles north-east), Leamington Spa (13 miles north-east), Kenilworth (14 miles north-east), Alcester (4 miles north-west) and Shipston-on-Stour (11 miles south-east).
Local landmarks in Binton
Locally, our jobs take us to homes close to Church of St Peter and The Four Alls pub and the streets around them. Binton’s nearest station is Stratford-upon-Avon Parkway station, about 3 miles north-east. Further afield, we also cover the area around Old Red Lion Shopping Centre (3.7 miles east) and Old Stratford and Drayton (2.2 miles north-east). Open spaces near Binton include River Arrow Nature Reserve.
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
What affects the price in Binton
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- The material
- Whether we combine several jobs
- The type of damage
- Whether old repairs or coatings need taking off
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Send pictures for a quote
Phone pictures are fine, there’s no need for anything special. Ensure they show:
- Your postcode, so we can check dates
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say immediately if a repair is the right fix.
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Leaking fittings, which need a plumber
- Cracks in acrylic we can’t reach from underneath
- Flexing caused by a failed cradle or loose feet
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Binton
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a few hours, depending on the damage, tidy-up included.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, generally by the next day, the bath is ready to use.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Mention any parking restrictions or tricky access
Ask for a price
Most customers in Binton get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What we are called out for in Binton
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
People typically call us when they notice one of these:
- Rust by the waste and overflow
- A cracked acrylic bath
- Scratches you can feel with a fingernail
- Chips caused by builders
Comparing quotes
- Whether the price covers travel
- What happens if they find more damage
- What aftercare is recommended
- Whether cleaning and preparation are in the price
Repairing versus replacing in Binton
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Technicians who travel to you, UK-wide
- Colour mixed on the day to match
- Fixed prices from your photos
- CHAS and Constructionline accredited
Read our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
