Midlothian · Scotland
Bath Repair for Birkenside homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Birkenside, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips on the rim or sides
- Impact holes in acrylic
Bath repair at your home in Birkenside
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Typical jobs include chips along the edge of the bath and damage beneath the taps, across cast iron enamel, acrylic and roll-top & freestanding.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Where
- Birkenside (EH23)
- Area hub
- Midlothian
- Guarantee
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Questions from Birkenside
Are there extra charges for Birkenside?
Travel is included in the price, with the same prices everywhere we work.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
What areas do you cover?
We work UK-wide. Prices do not change with location.
Do you repair coloured baths?
Yes, coloured baths are no problem. The colour is tinted by hand on the day.
How long before I can use the bath?
Normally the day after. We’ll tell you the exact curing time when we finish.
What happens once I’ve sent pictures?
You will get a fixed quote back, normally with dates to choose from. You are under no obligation.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Birkenside and the surrounding area
Birkenside is about 3 miles south-east of Bonnyrigg, in Midlothian. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 33 places across Midlothian, from the larger towns to small villages. We work right across the region, from Birkenside to Edinburgh (10 miles away).
We cover every part of EH23 and the streets around it. Local streets include Main Street, Vogrie Road and Private Road, all of which we cover. We also cover the places around Birkenside: Arniston (1 mile south), Gorebridge (1 mile north), North Middleton (1 mile south-east), Gowkshill (2 miles north) and Carrington (2 miles west). Larger places within reach include Bonnyrigg (3 miles north-west), Dalkeith (4 miles north), Penicuik (7 miles west), Loanhead (5 miles north-west), Shawfair (6 miles north) and Danderhall (6 miles north-west).
Around Birkenside
In Birkenside, that means homes near Hunterfield Road Church and the streets around them. There is a railway station in Birkenside itself: Gorebridge station. Nearby you will also find Midlothian Community Hospital (3.5 miles north-west) and Catcune Castle (0.5 miles south-east). The countryside around Birkenside includes Edgelaw Reservoir.
Why repair rather than replace?
Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why choose Surface Doctor in Birkenside
- Repair technicians who travel to you, UK-wide
- Usually one visit, start to finish
- No need to remove anything
- A fixed quote before booking
Take a look at our full price list or guide to resurfacing and replacement costs.
When we’d advise against a repair
It helps to know what we cannot do too:
- Acrylic cracks with no access behind them
- Water coming from the waste or taps rather than the bath
- A bath that moves underfoot, until its support is fixed
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Birkenside
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes two to three hours for most chips for most jobs. The room is left tidy.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the next day, the bath is ready to use.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
Ask for a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Related advice
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Don’t scrub with anything abrasive
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
- Don’t leave a fresh chip for long
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
For landlords and businesses
For anyone letting property in or around Birkenside, we will quote for several properties at once. Just send pictures for each address and we’ll come back with a combined price.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Common problems we fix in Birkenside
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
Common reasons people in Birkenside contact us include:
- Holes from dropped items
- Snagging damage from a refit
- Rust by the waste and overflow
- Damage beneath the taps
What your quote should include
- How changes to the job are handled
- Who turns up on the day
- Whether the colour is mixed to match
- How your room will be protected
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Towns and villages near Birkenside
What else we do in Birkenside
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
