Aberdeenshire · Scotland
Bath chip & crack repair in Birsemore, Aberdeenshire
Bath repair across Birsemore and nearby, generally in one visit.
- Repairs from £95
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
About our bath repair in Birsemore
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. Our repair technicians work on pressed steel enamel, cast iron enamel and whirlpool & spa baths, and common reasons people get in touch are cracks in an acrylic bath and deep scratches in acrylic.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Birsemore (AB34)
- Region
- Aberdeenshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Prices start from £95. We charge the same across the UK, including Birsemore. The price reflects:
- The material and finish
- Doing more than one item at once
- Any earlier repairs that need removing first
- The colour and finish to match
Our prices are the same across the UK, with no extra for Birsemore. What changes the price is the job itself: the material, the amount of damage and how many items.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Daylight if possible, and no flash reflection
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- Details of any past repairs
To get a price, send two or three pictures using our quote form or ring us. We will tell you honestly whether it can be repaired.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
For anyone letting property in or around Birsemore, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
When we would advise against a repair
A repair isn’t right for every job, for example:
- Metal that has corroded all the way through
- Cracks in acrylic we cannot reach from underneath
- Water coming from the waste or taps rather than the bath
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
What else we do in Birsemore
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Our work in Birsemore
Birsemore is about 11 miles west of Banchory, in Aberdeenshire. We travel to clients in Birsemore and nearby villages, so nothing has to leave your home. Birsemore is one of 161 places in Aberdeenshire where we work. We work right across the region, from Birsemore to Edinburgh (about 79 miles away).
Our visits in AB34 are booked in the same way as anywhere else. From Huntly Road, Bridge View Road and Charlestown Road or a nearby road, a technician can come to you. Nearby, we also work in Aboyne (1 mile north), Dinnet (4 miles west), Kincardine O'Neil (4 miles east), Tarland (5 miles north-west) and Potarch (5 miles east). Within a short drive, we also cover Banchory (11 miles east), Alford (12 miles north), Ballater (10 miles west) and Torphins (7 miles north-east).
Local landmarks in Birsemore
In Birsemore, that means homes near St Machar's Parish Church and Aboyne Academy, among other places. Well-known places in the area include Aboyne Hospital (0.9 miles north-east) and Aboyne Castle (1.2 miles north). Green spaces nearby include Mortlich and Loch of Aboyne.
What happens on the day
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. Allow two to three hours for most chips.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Let us know if it has been repaired before
- Let us know which floor the room is on
- Tell us about parking, stairs or access
Ask for a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Related advice
Common questions in Birsemore
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Do you cover Birsemore?
We do. Repair technicians travel to Birsemore from across the region, and the price is the same as everywhere else.
Will the repair show?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Common problems we fix in Birsemore
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Common reasons people in Birsemore contact us include:
- Hairline or through cracks in acrylic
- Damage done while the bathroom was being fitted
- A chipped rim or side
- Chips under the taps
What to look for in a quote
- How long it needs to cure
- Who will actually do the work
- How to care for the finish
- How the colour is matched
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Do not leave a fresh chip for long
- Give the bath a quick rinse after use
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath without abrasive products.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
About our accreditations · Every repair comes with a one-year guarantee.
