Herefordshire · England
Bath Repair for Birts Street homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Birts Street. Send pictures for a free, fixed quote.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
How we handle bath repair in Birts Street
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. If you are dealing with rust by the waste and overflow and scratches you can feel with a fingernail, we can normally put it right, on cast iron enamel, whirlpool & spa baths and pressed steel enamel alike.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Birts Street (WR13)
- Area hub
- Herefordshire
- Cover
- A year, on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why Birts Street customers choose us
- We’ll tell you if it’s not worth repairing
- Most jobs done in one visit
- A year’s guarantee on all work
- Technicians who travel to you, UK-wide
See our pricing or bath cost comparison.
Landlord and trade work in Birts Street
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Questions from Birts Street
What happens once I’ve sent pictures?
You will get a fixed quote back, plus dates. You are under no obligation.
Which areas do you work in?
We work UK-wide, so Birts Street is covered. Prices don’t change with location.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What about rust by the waste?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Towns and villages near Birts Street
Other services in Birts Street
How to care for the repair
After the repair has cured, a few habits help it last:
- Have new chips seen to early
- Don’t leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath doesn’t move when you stand in it
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
What affects the price in Birts Street
Prices start from £95. There is no charge for travel to Birts Street. The price depends on:
- What the surface is made of
- Unusual colours or finishes
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from photos
Two or three clear pictures are usually enough. It helps if you send:
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- The material, if you know it
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
What we are called out for in Birts Street
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
The most common problems we’re called about are:
- Chips caused by builders
- Rusty patches near the plughole
- Chips under the taps
- Deep scratches in acrylic
What your quote should include
- How your room will be protected
- What prep work is covered
- Whether the price is fixed and includes VAT
- Whether a trained technician does the job
What we cannot put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Birts Street
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
How the visit works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, depending on the damage, and we will tell you if anything changes.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Getting ready for the visit
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
- Point us to the nearest place to park
Get a quote
If you’re in Birts Street and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Where we work around Birts Street
Birts Street is about 6 miles south of Great Malvern, in Herefordshire. From the centre of Birts Street to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in all 255 towns and villages across Herefordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 35 miles away.
Postcode districts we cover here: WR13. Close by, we cover Castlemorton (1 mile north), Drugger's End (1 mile north), Berrow (1 mile south), White End (1 mile south) and Welland (2 miles north). We also work in nearby towns such as Ross-on-Wye (14 miles south-west), Ledbury (5 miles west), Merrivale (14 miles south-west), Bromyard (14 miles north-west), Colwall Stone (5 miles north-west) and Leigh Sinton (9 miles north).
Around Birts Street
Locally, our jobs take us to homes close to Church of St Gregory, Castlemorton Church of England Primary School and Farmers Arms Public House. Birts Street’s nearest station is Colwall station, about 4.3 miles north-west of the centre. Further afield, we also cover the area around Bronsil Castle (2.6 miles west). Open spaces near Birts Street include Hollybed Farm Meadows and Raggedstone Hill.
About our accreditations · Every repair comes with a one-year guarantee.
