Herefordshire · England

Bath Repair in Castlemorton

Bath repair in Castlemorton without the cost of replacing. Get a fixed quote from your pictures, then book a visit.

  • Repairs from £95
  • A chip where the taps sit
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Castlemorton

Bath repair at your home in Castlemorton

We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. You can generally use the bath the day after. We are frequently asked to fix impact holes in acrylic and a chipped rim or side, in whirlpool & spa baths, cast iron enamel and pressed steel enamel.

The work is covered for a year after we finish. Just call us if there’s a problem and we will sort it.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Castlemorton (WR13)
County
Herefordshire
Cover
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

FAQs for Castlemorton

It’s been repaired before. Can you still fix it?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.

Do you cover Castlemorton?

Yes. We work across the UK and come to Castlemorton and the rest of Herefordshire. Send photos and we’ll quote, or call 0345 017 0787.

What happens next?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.

Is it worth repairing rather than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.

When can I have a bath again?

Usually within a day, though it depends on what we’ve done.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

How to care for the repair

A little care keeps the finish looking good. Our advice:

  • Fix dripping taps early to stop staining and limescale
  • Clean with warm water and a mild detergent
  • Don’t leave a fresh chip for long
  • Cover the bath during DIY or decorating

Keep metal objects like razors and cans off the surface, as they can leave rust marks. And fix dripping taps promptly.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

Castlemorton and the surrounding area

Castlemorton is about 6 miles south of Great Malvern, in Herefordshire. Clients in Castlemorton get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Castlemorton is one of 255 places in Herefordshire we cover. We work right across the region, from Castlemorton to Birmingham (about 35 miles away).

Jobs in WR13 are booked in the same way as anywhere else. We also cover the places around Castlemorton: Birts Street (1 mile south), Drugger's End (1 mile north), Welland (2 miles north), Berrow (2 miles south) and White End (2 miles south). Larger places within reach include Ross-on-Wye (15 miles south-west), Ledbury (5 miles west), Merrivale (15 miles south-west), Bromyard (14 miles north-west), Colwall Stone (4 miles north-west) and Leigh Sinton (8 miles north).

Landmarks near Castlemorton

Typical jobs here are in homes near Church of St Gregory, Castlemorton Church of England Primary School and Robin Hood pub, among other places. Castlemorton’s nearest station is Colwall station, roughly 3.9 miles north-west. Other landmarks nearby include British National Fencing Museum (3.7 miles north) and British Camp (2.7 miles north-west). The countryside around Castlemorton includes Hollybush Hill and Hollybed Farm Meadows.

Map of Castlemorton © OpenStreetMap contributors

Why repair rather than replace?

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why us?

  • A year’s guarantee on all work
  • Straight answers about what a repair can do
  • Same prices wherever you are
  • Technicians who travel to you, UK-wide

See our prices page or bath cost comparison.

Common problems we fix in Castlemorton

Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.

If you can see any of these, send us a photo:

  • Hairline or through cracks in acrylic
  • Rusty patches near the plughole
  • A hole punched through by something heavy
  • Chips under the taps

Questions to ask before you book

  • Whether the colour is mixed to match
  • When it can be used again
  • What preparation is included
  • How to care for the finish

Our hiring checklist

Repairs by material

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

How it works

Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes two to three hours for most chips, and the room is left clean and tidy.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We build up the finish and polish it into the surrounding enamel.
  5. Once it has cured, typically by the following day, the bath is ready to use.

Before we arrive

  • Tell us about parking, stairs or access
  • Move bottles, mats and clutter away from the area
  • Avoid using the area for a few hours before we arrive

Ask for a price

We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a fixed price

Related advice

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

Landlord and trade work in Castlemorton

We carry out planned and one-off repairs for housing associations and facilities teams in Herefordshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

For anyone letting property in or around Castlemorton, we can repair and quote for several addresses together. Send pictures for each one and we’ll come back with a combined price.

How we price bath repair

Prices start from £95. Each job gets its own fixed quote. These are the things that affect it:

  • Whether it’s a chip, crack, burn or wear
  • Previous DIY repairs that have to come out
  • Where the damage is and how we get to it
  • How many areas need work

The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.

How to get a fixed price

You can take the pictures on your phone, there is no need for anything special. Make sure they show:

  • Natural light rather than flash
  • A coin or ruler next to the damage for scale
  • Any details about the material
  • A clear, close picture of the problem area

Send us pictures of the damage and a wider shot of the whole item, with your WR13 postcode, and we will reply with a fixed quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.