Lancashire · England
Bath Re-enamelling for Black Pole homes
Bath re-enamelling across Black Pole and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Chips and rust in more than one place
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Don’t leave bottles, razors or sponges standing on the surface
- Rinse off hair dye, oils and bath bombs straight away
- Leave the bath for the full curing time before using it
- Fix dripping taps quickly
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Bath re-enamelling in Black Pole, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, and we take our time over it. Our repair technicians work on Victorian roll-tops, cast iron baths and basins & shower trays, and people most frequently call us about staining under the taps and around the waste and worn patches where water runs and sits.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Black Pole (PR4)
- Area hub
- Lancashire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
FAQs for Black Pole
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
What areas do you cover?
We cover the entire UK, including Black Pole and the rest of Lancashire. Just include your postcode and we’ll confirm dates.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can you price it without visiting?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Where we work around Black Pole
Black Pole is about 3 miles north-west of Fulwood, in Lancashire. Jobs in Black Pole are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Black Pole is one of 482 towns and villages in Lancashire where we work. You can also see our page for Liverpool, about 29 miles away.
All of PR4 is within our area, from the main roads to the quietest streets. From Eaves Lane and Lewth Lane or a nearby road, we can come to you. Nearby, we also work in Lewth (1 mile north-west), Catforth (1 mile south-west), Cuddy Hill (1 mile north), Woodsfold (1 mile west) and Woodplumpton (1 mile south-east). Larger places within reach include Preston (5 miles south-east), Chorley (13 miles south-east), Lytham St Anne's (11 miles south-west), Bamber Bridge (8 miles south-east), Leyland (9 miles south) and Fulwood (3 miles south-east).
What’s near Black Pole
We visit homes around Catforth Primary School, Broughton High School and The Plough at Eaves pub. The closest station to Black Pole is Salwick station, roughly 3.2 miles south-west. A little further out are Preston Castle (4.3 miles south-east) and Church Cottage (2.7 miles south-east).
How it works
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
- Make sure the room can be ventilated
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Also near Black Pole
What else we do in Black Pole
When to call us in Black Pole
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Clients usually contact us about:
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
- Brown or grey marks that do not clean off
What to look for in a quote
- If travel is included in the price
- How the room is protected while they work
- What preparation is included
- The length of the guarantee and what it covers
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Black Pole use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Why Black Pole customers choose us
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- We leave the room as we found it
- Same prices wherever you are
Read our pricing or bath cost comparison.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is generally cheaper.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
About our accreditations · Every repair comes with a one-year guarantee.
