Warwickshire · England
Bath chip & crack repair in Blackdown, Warwickshire
Damaged bath in Blackdown? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Chips caused by builders
- A failed DIY repair that’s discoloured or lifting
What affects the price in Blackdown
Repairs from £95. We price every job individually, from your photos. What matters most is:
- Unusual colours or finishes
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- The material and finish
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- One sharp close-up of the damage
- A wider photo showing the whole bath
- The material, if you know it
- Good light, ideally daylight, without flash glare
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
How we handle bath repair in Blackdown
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the next day. Typical jobs include holes from dropped items and scuffs and scratches in the surface, on whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Blackdown (CV32)
- County
- Warwickshire
- Warranty
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Blackdown
Glass and heavy bottles cause more chips than anything else, with dropped shower heads close behind. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Keep an eye out for any of the following:
- A chipped rim or side
- An old repair that has yellowed or come loose
- Deep scratches in acrylic
- Damage done while the bathroom was being fitted
What to look for in a quote
- Who will actually do the work
- A fixed price, and whether VAT is included
- What preparation is included
- How soon you can use it again
Also near Blackdown
Also in Blackdown
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- Wear across the entire surface, which needs re-enamelling
Send us pictures and we will tell you honestly before booking.
Materials we work on in Blackdown
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
Your questions about bath repair in Blackdown
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How quickly can you book me in?
We’ll give you dates with your quote. Tell us if you need it done quickly.
How invisible is a bath repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Are there extra charges for Blackdown?
Travel is included in the price, with the same prices everywhere we work.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
Is a holed acrylic bath repairable?
Typically. Photos of the hole and the underside help us check.
How long does the repair take to cure?
Typically within a day, depending on the repair.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Blackdown as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Where we work around Blackdown
Blackdown is about 2 miles north of Royal Leamington Spa, in Warwickshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover 324 places in Warwickshire, from the larger towns to small villages. You can also see our page for Birmingham, about 18 miles away.
Here we cover the CV32 postcode area. Streets in the area include Kenilworth Road, Sandy Lane and Old Milverton Lane, all of which we cover. We also travel to Ashow (1 mile north), Hill Wootton (1 mile west), Old Milverton (1 mile south-west), Lillington (1 mile south-east) and Cubbington (2 miles east). We also work in nearby towns such as Rugby (13 miles east), Nuneaton (15 miles north), Warwick (3 miles south-west), Stratford-upon-Avon (11 miles south-west), Bedworth (12 miles north) and Kenilworth (3 miles north-west).
Local landmarks in Blackdown
Typical jobs here are in homes near Newbold Comyn, North Leamington School and St Mary Magdalene's Church and the streets around them. Also close by are Telford Junior School (0.9 miles east) and The Kingsley School (1.3 miles south). For rail, the closest station is Leamington Spa station, roughly 2 miles south. Other landmarks nearby include Royal Priors Shopping Centre (1.5 miles south) and Warwickshire Nuffield Hospital (within half a mile south). The countryside around Blackdown includes Oxpen Meadow Lake and Ryton Wood Meadows.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What we do, step by step
You do not need to empty the room. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take two to three hours for most chips, and you can get on with other things while we’re there.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the next day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
How to get a price
If you are in Blackdown and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Ensure an acrylic bath is firm underfoot
- Get a dripping tap fixed promptly
- Put a towel in the bath if you’re working above it
- Get any new chip repaired before it rusts
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
Until we visit, a strip of waterproof tape over the damage helps, so water cannot get in. Remove it before the repair.
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
Why book with us
- Colour-matched on site
- Most jobs done in one visit
- Dust sheets down, tidy finish
- No extra charge for your area
Take a look at our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
