Warwickshire · England

Bath Repair in Old Milverton

Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Old Milverton. Send pictures for a free, fixed quote.

  • Repairs from £95
  • Rusty patches near the plughole
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Old Milverton

Bath repair in Old Milverton, done in place

We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. If you are dealing with scratches you can feel with a fingernail and a kit repair that didn’t last, we can normally put it right, on cast iron enamel, acrylic and roll-top & freestanding alike.

You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll come back.

Where
Old Milverton (CV32)
Region
Warwickshire
Guarantee
One year on every repair
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

What we’re called out for in Old Milverton

Dropped items cause the majority of chips, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

It’s worth getting a quote if you see:

  • Holes from dropped items
  • Rusty patches near the plughole
  • Cracks in an acrylic bath
  • Deep scratches in acrylic

What to look for in a quote

  • Whether cleaning and preparation are in the price
  • When it can be used again
  • A fixed quote, and whether VAT is included
  • If travel is included in the price

10 questions to ask before you book

Keeping it looking good

Once the work has cured, treat it gently:

  • Give the bath a quick rinse after use
  • Protect the bath with a towel when doing jobs nearby
  • Keep metal cans and razors off the surface
  • Have new chips seen to early

Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.

Rust spreads under enamel faster than most people expect. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.

What bath repair costs

Repairs from £95. You will know the full cost before booking. We look at:

  • The size and number of damaged areas
  • Where the damage is and how we get to it
  • The material
  • What kind of damage it is

A repair usually costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

Send photos for a quote

Before you send photos, a few simple things make all the difference:

  • A clear, close picture of the problem area
  • A wider photo showing the entire bath
  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.

FAQs for Old Milverton

Will the repair last?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Which areas do you work in?

Everywhere in the UK, Old Milverton included. There is no extra charge for travel.

Is there a call-out fee?

Travel is included in the price, and we charge the same wherever you are.

How soon can you come?

That depends on our diary for your area. We will offer you dates when we send your quote.

How invisible is a bath repair?

On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.

Can you repair a hole in a bath?

In most cases. Photos of the hole and the underside help us check.

Do you do work for letting agents?

Yes. We work for landlords, agents, builders and businesses as well as householders across Warwickshire.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Repairing versus replacing in Old Milverton

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.

Why book with us

  • Straight answers about what a repair can do
  • Free fixed quotes from pictures
  • One visit for most repairs
  • Work done at your home or business

Take a look at our full price list or resurfacing vs replacement cost guide.

Old Milverton and nearby

Old Milverton is about 2 miles north-west of Royal Leamington Spa, in Warwickshire. Wherever you are in the CV32 postcode area, we come to you. Old Milverton is one of 324 places in Warwickshire where we work. Our jobs stretch from Old Milverton to Birmingham (about 18 miles away).

Our visits in CV32 work the same way as everywhere else we cover. Close by, we cover Hill Wootton (1 mile north), Blackdown (1 mile north-east), Leek Wootton (1 mile north-west), Ashow (1 mile north-east) and Lillington (2 miles east). Within a short drive, we also cover Rugby (14 miles east), Stratford-upon-Avon (10 miles south-west), Bedworth (12 miles north), Kenilworth (3 miles north), Fordbridge (15 miles north-west) and Southam (8 miles south-east).

Landmarks near Old Milverton

Locally, our jobs take us to homes close to Saxon Mill pub, Brookhurst Primary School and St. Nicholas' Park, among other places. Nearby too are Church of Saint James the Great (under half a mile west), Trinity Catholic School (0.6 miles south-east) and The Kingsley School (1.1 miles south-east). The closest station to Old Milverton is Warwick station, roughly 1.5 miles south-west of the centre. A little further out are Warwick Castle (2 miles south-west) and Leamington Spa Art Gallery and Museum (1.6 miles south-east). Open spaces near Old Milverton include Oxpen Meadow Lake.

Map of Old Milverton © OpenStreetMap contributors

Different materials, different repairs

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, in much the same way.

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

What we do, step by step

Arrival times are agreed in advance. Once we’re there, the work takes two to three hours for most chips. The room is left tidy and you will know when it can be used.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, usually the day after.

Preparing for the visit

  • Keep a parking space free if you can
  • Keep children and pets away from the room on the day
  • Clear toiletries, mats and anything else from around the area

Ask for a price

Upload pictures of the damage and a wider shot of the entire item, and tell us you’re in Old Milverton, and we’ll reply with a fixed quote.

Get a fixed quote

Advice

When we’d advise against a repair

A repair isn’t always the answer, and we would rather say so up front. We cannot fix:

  • Acrylic cracks with no access behind them
  • Wear across the entire surface, which needs re-enamelling
  • Leaking fittings, which need a plumber

Send us pictures and we’ll tell you honestly before booking.

Materials we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.