Staffordshire · England
Bath chip & crack repair in Blackshaw Moor, Staffordshire
Bath repair in and around Blackshaw Moor: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Snagging damage from a refit
- An old repair that has yellowed or come loose
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before you book. We look at:
- How easy the damage is to reach
- The material
- The colour and finish to match
- What kind of damage it is
The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what helps:
- The material, if you know it
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- A close-up of the damage, in focus
Most customers in Blackshaw Moor get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Bath repair in Blackshaw Moor without replacing anything
A typical bath repair is a few hours’ work, and you can normally bathe again the next day. You won’t need a plumber or tiler, because nothing is disconnected. We regularly repair roll-top & freestanding, cast iron enamel and whirlpool & spa baths, and people most frequently call us about chips along the edge of the bath and a kit repair that didn’t last.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Blackshaw Moor (ST13)
- Area hub
- Staffordshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath repair in Blackshaw Moor
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, any chip down to the metal lets water in, and rust follows.
These are the problems we’re asked about most:
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- Chips along the edge of the bath
What your quote should include
- Whether there are any call-out or travel charges
- How to look after the finish
- How long the guarantee is and what it covers
- When it can be used again
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Places near Blackshaw Moor
What else we do in Blackshaw Moor
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
How to care for the repair
Looking after the surface is easy:
- Protect the bath with a towel when doing jobs nearby
- Ensure an acrylic bath is firm underfoot
- Keep metal cans and razors off the surface
- Fix dripping taps early to stop staining and limescale
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A steel bath rusted through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Our work in Blackshaw Moor
Blackshaw Moor is about 3 miles north-east of Leek, in Staffordshire. We visit homes and businesses in Blackshaw Moor, so you don’t need to take anything anywhere. We cover 512 places across Staffordshire. Our jobs stretch from Blackshaw Moor to Manchester (about 25 miles away).
Here we cover the ST13 postcode area. Nearby, we also work in Haregate (2 miles south-west), Ball Haye Green (2 miles south-west), Abbey Green (2 miles south-west), Leek (3 miles south-west) and Lowe Hill (3 miles south). Further out, we also cover Newcastle-under-Lyme (13 miles south-west), Longton (12 miles south-west), Biddulph (8 miles west), Alsager (14 miles west), Kidsgrove (11 miles west) and Cheadle (10 miles south).
Near you in Blackshaw Moor
Typical jobs here are in homes near Ye Olde Rock Inn, Leek High School and Blackshaw Moor CofE (VC) First School, among other places. Well-known places in the area include St Edward's Hospital (4.4 miles south-west) and Nicholson Institute and Leek College of Further Education (2.5 miles south-west). Green spaces nearby include Merryton Low and Blakemere Pond.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes two to three hours for most chips. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
How to prepare
- Let the surface dry out before the visit
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
Ask for a price
For a price in Blackshaw Moor, the easiest route is photos: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
Your questions about bath repair in Blackshaw Moor
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
When can I have a bath again?
Usually within a day, depending on the repair.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before and we will plan for it.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
How invisible is a bath repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Do you come to Blackshaw Moor?
Yes, we do. We send a technician to Blackshaw Moor for every job, and the price is the same as everywhere else.
About our accreditations · Every repair comes with a one-year guarantee.
