North Yorkshire · England
Bath Repair for Bland Hill homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Bland Hill, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rust by the waste and overflow
- Chips caused by builders
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and tidy away. Allow a few hours from start to finish. Before we go, we will explain how long to leave it and how to care for it.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can generally use the bath the day after.
How to prepare
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
Get a quote
The quickest way to a price is to send two or three photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Read more
About our bath repair in Bland Hill
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in one visit. We work on roll-top & freestanding, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are a kit repair that didn’t last and a hole punched through by something heavy.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Bland Hill (HG3)
- County
- North Yorkshire
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- One visit for most repairs
- Colour-matched on site
- Fixed prices from your photos
- One-year guarantee on every repair
See our prices page or resurfacing vs replacement cost guide.
What affects the price in Bland Hill
Repairs from £95. We price every job individually, from your pictures. The main factors are:
- The colour and finish to match
- The material
- Whether it’s a chip, crack, burn or wear
- How much damage there is
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
You can take the photos on your phone. Just ensure we can see:
- The material, if you know it
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Any earlier repairs or coatings
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
When to call us in Bland Hill
Heavy toiletries are the biggest single cause of chips, with dropped shower heads close behind. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Customers generally contact us about:
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
- A kit repair that didn’t last
- Chips under the taps
What your quote should include
- What preparation is included
- Aftercare advice
- Is the price fixed, and does it include VAT?
- Whether the colour is mixed to match
FAQs for Bland Hill
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you cover the entire of North Yorkshire?
The whole UK, including all of North Yorkshire. Just include your postcode and we’ll confirm dates.
How long before I can use the bath?
Generally within a day, depending on the repair.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Do you work in Bland Hill?
Yes, we do. Repair technicians travel to Bland Hill from across the region, with no extra charge for travel.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Other services in Bland Hill
About Bland Hill
Bland Hill is about 5 miles north of Otley, in North Yorkshire. Wherever you are in the HG3 postcode area, a technician comes to you. We cover 626 places in North Yorkshire. We work right across the region, from Bland Hill to Leeds (13 miles away).
Every address in HG3 is covered, from the main roads to the quietest streets. Streets in the area include Broad Dubb Road and Brame Lane, and we cover them all. Close by, we cover Bramelane (1 mile north-west), Jack Hill (1 mile south-west), Lindley (3 miles south-east), Braythorn (3 miles south-east) and Farnley (3 miles south). Larger places within reach include Harrogate (6 miles east), Knaresborough (9 miles east), Skipton (14 miles west), Ripon (13 miles north-east), Starbeck (7 miles east) and Bilton (6 miles east).
Local landmarks in Bland Hill
In Bland Hill, that means homes near The Sun Inn and Church of St Lawrence and the streets around them. Nearby you will also find Wharfedale Hospital (4.4 miles south) and John O'Gaunt's Castle (0.9 miles north-east). For a walk, there’s Great Alms Cliff.
When we’d advise against a repair
Some jobs aren’t right for a repair, for example:
- Water coming from the waste or taps rather than the bath
- Rust that has eaten right through a steel bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Looking after it afterwards
Once the work has cured, treat it gently:
- Get any new chip repaired before it rusts
- Give the bath a quick rinse after use
- Protect the bath with a towel when doing jobs nearby
- Keep abrasive pads and gritty cleaners away from the bath
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
