North Yorkshire · England
Bath Repair for Bramelane homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bramelane, with a one-year guarantee on every repair.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips caused by builders
Bath repair in Bramelane without replacing anything
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Typical jobs include a failed DIY repair that’s discoloured or lifting and a hole punched through by something heavy, across pressed steel enamel, whirlpool & spa baths and cast iron enamel.
You’re covered after we leave: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Location
- Bramelane (HG3)
- County
- North Yorkshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we cannot put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Cracks in acrylic we can’t reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
What else we do in Bramelane
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Prices and what affects them
Repairs from £95. You’ll know the full cost before you book. We look at:
- Where the damage is and how we get to it
- How hard the colour is to match
- The type of damage
- Any earlier repairs that need removing first
Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
You can usually get a fixed quote without us visiting. To make it quick:
- Your postcode, so we can check dates
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
If you are in Bramelane and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Common questions in Bramelane
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and you’ll get one combined price.
Something went through my bath. Can it be fixed?
Normally. Send us a picture of the hole and one from under the bath if you can.
When can I have a bath again?
Normally by the following day, though it depends on what we have done.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Keeping it looking good
Simple care helps the repair last. Our advice:
- Rinse it down after each bath
- Clean with warm water and a mild detergent
- Check that an acrylic bath does not move when you stand in it
- Have new chips seen to early
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
How the visit works
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a few hours in most cases. We leave the room clean and you will know when it can be used.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the following day.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
Ask for a price
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
When to call us in Bramelane
Rust generally starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The things customers typically mention when they call are:
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
- Holes from dropped items
- Deep scratches in acrylic
Comparing quotes
- Whether the price is fixed and includes VAT
- What aftercare is recommended
- How long it needs to cure
- How changes to the job are handled
Repairs by material
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Where we work around Bramelane
Bramelane is about 5 miles north of Otley, in North Yorkshire. Anywhere in HG3, a technician comes to you. Our repair technicians cover all 626 towns and villages across North Yorkshire. Our jobs stretch from Bramelane to Leeds (13 miles away).
Our visits in HG3 are booked in the same way as anywhere else. Neighbouring places we cover include Bland Hill (1 mile south-east), Jack Hill (1 mile south-west), Lindley (4 miles south-east), Farnley (4 miles south) and Braythorn (4 miles south-east). Within a short drive, we also cover Harrogate (6 miles east), Knaresborough (9 miles east), Skipton (13 miles west), Ripon (12 miles north-east), Starbeck (8 miles east) and Bilton (6 miles east).
Around Bramelane
Locally, our jobs take us to homes close to The Sun Inn and Church of St Lawrence. Other landmarks nearby include Wharfedale Hospital (4.6 miles south) and John O'Gaunt's Castle (0.9 miles north-east).
About our accreditations · Every repair comes with a one-year guarantee.
