Nottinghamshire · England
Bath Repair in Bleasby
We travel to Bleasby for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Chips on the rim or sides
- A chip where the taps sit
Bath repair at your home in Bleasby
A damaged bath does not have to mean a new bathroom. Our repair technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. Common call-outs are for cracks in an acrylic bath and rusty patches near the plughole, in pressed steel enamel, cast iron enamel and whirlpool & spa baths.
Whatever the size of the job, you get the same one-year guarantee in Bleasby and across Nottinghamshire.
- Area
- Bleasby (NG14, NG25)
- County
- Nottinghamshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your pictures, we will talk to you before going ahead.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can typically use the bath the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Covering Bleasby
Bleasby is about 6 miles south-west of Newark-on-Trent, in Nottinghamshire. Our repair technicians come to customers in Bleasby, so you do not need to take anything anywhere. Bleasby is one of 329 places in Nottinghamshire we cover. Our nearest city page is Birmingham, about 56 miles away.
Every address in NG14 and NG25 is covered, from the main roads to the quietest streets. Local streets include Main Street, Station Road and Hawthorn Close, all of which we cover. Close by, we cover Goverton (1 mile west), Morton (1 mile north-east), Thurgarton (1 mile west), Fiskerton (2 miles north-east) and Brinkley (2 miles north). Larger places within reach include Mansfield (13 miles north-west), Beeston (15 miles south-west), Carlton (8 miles south-west), Sutton in Ashfield (15 miles north-west), Hucknall (11 miles west) and Newark-on-Trent (6 miles north-east).
Landmarks near Bleasby
Typical jobs here are in homes near Southwell Minster School, Bleasby Church of England Primary School and St Mary's Church. There’s a railway station in Bleasby itself: Bleasby station. Further afield, we also cover the area around Newark Hospital (5.6 miles east) and Lowdham Motte (3.7 miles south-west).
Also near Bleasby
Also in Bleasby
Materials and what they mean for the repair
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Bleasby: your questions answered
Will there be a smell?
There can be some smell while we work. It clears as the materials cure.
What happens after I send pictures?
We review the photos and send a fixed quote with dates.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
When can I have a bath again?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Can I fix it myself?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a repair can’t fix
We would rather lose a job than do one that won’t last, so these are the limits:
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
Signs you need bath repair in Bleasby
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Customers generally contact us about:
- Impact holes in acrylic
- Chips under the taps
- A cracked acrylic bath
- A chipped rim or side
Questions to ask before booking
- How long it needs to cure
- What happens if they find more damage
- What preparation is included
- Whether the price is fixed and includes VAT
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Check that an acrylic bath does not move when you stand in it
- A dripping tap stains enamel, so fix it early
- Keep abrasive pads and gritty cleaners away from the bath
- Cover the bath during DIY or decorating
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Landlord and trade work in Bleasby
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How we price bath repair
Prices start from £95. There is no area surcharge for Bleasby. The price reflects:
- Access to the area
- The size and number of damaged areas
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
Good pictures mean an accurate price. Here’s what we find most useful:
- A close-up of the damage, in focus
- What it’s made of, if you know
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
Most clients in Bleasby get their price from photos. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
About our accreditations · Every repair comes with a one-year guarantee.
