Nottinghamshire · England
Bath chip & crack repair in Morton, Nottinghamshire
Bath repair in Morton without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Chips caused by builders
- A chip where the taps sit
Bath repair in Morton, done in place
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the repaired area is colour-matched so it blends in. If you are dealing with rust by the waste and overflow and snagging damage from a refit, we can help, on whirlpool & spa baths, pressed steel enamel and acrylic alike.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Morton (NG25)
- Area hub
- Nottinghamshire
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, usually the next day.
How to prepare
- Tell us about parking, stairs or access
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
Towns and villages near Morton
More services for Morton
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Morton and the surrounding area
Morton is about 5 miles west of Newark-on-Trent, in Nottinghamshire. Clients in Morton get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Our repair technicians cover 329 places across Nottinghamshire, from the larger towns to small villages. You can also see our page for Birmingham, about 57 miles away.
Postcode districts we cover here: NG25. That includes homes on Main Street, Middle Lane and Manor Drive. We also travel to Fiskerton (1 mile east), Brinkley (1 mile north), Bleasby (1 mile south-west), Goverton (1 mile south-west) and Upton (2 miles north). Larger places within reach include Mansfield (13 miles north-west), Carlton (9 miles south-west), Sutton in Ashfield (15 miles west), Hucknall (12 miles west), Newark-on-Trent (5 miles east) and West Bridgford (13 miles south-west).
What’s near Morton
In Morton, that means homes near Southwell Minster School, St Denis' Church and The Bromley Arms Public House and the streets around them. Morton’s nearest station is Fiskerton station, about 0.5 miles north-east. Nearby you will also find Museum of Timekeeping (2 miles north) and Lowdham Motte (4.7 miles south-west).
Common questions in Morton
How long does the repair take to cure?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
What happens next?
We come back with a fixed price. You’re under no obligation.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
What about rust by the waste?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Work for landlords and builders
For anyone letting property in or around Morton, we can repair and quote for several addresses together. Send photos for each one and we will come back with a combined price.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
How to look after the repair
Nothing complicated is needed:
- Make sure an acrylic bath is firm underfoot
- Keep abrasive pads and gritty cleaners away from the bath
- Stick to mild cleaners and a soft cloth
- Rinse it down after each bath
There is nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Rust spreads under enamel faster than most people expect. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
When to call us in Morton
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
If you can see any of these, send us a photo:
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
- Cracks in an acrylic bath
- A chip where the taps sit
Before booking anyone
- How your room will be protected
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- What happens if the damage is worse than the pictures show
What a repair can’t fix
We won’t take on work that won’t last, so these are the limits:
- Leaks from the waste or overflow fittings (a plumber’s job)
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send photos and we will say what we think.
Materials we work on in Morton
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
Repair or replace in Morton?
Replacing a fitted bath typically means a plumber, removing the old bath, making good the tiles and panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Morton
- Rooms protected and left tidy
- Colour mixed on the day to match
- One visit for most repairs
- No extra charge for your area
Take a look at our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
