Staffordshire · England
Bath chip & crack repair in Blythe Bridge, Staffordshire
Bath repair in Blythe Bridge without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- Chips on the rim or sides
- Impact holes in acrylic
About our bath repair in Blythe Bridge
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. If you’re dealing with a cracked acrylic bath and a hole punched through by something heavy, we can usually put it right, on roll-top & freestanding, whirlpool & spa baths and acrylic alike.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Blythe Bridge (ST11)
- County
- Staffordshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath repair in Blythe Bridge
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.
These are the problems we’re asked about most:
- Rusty patches near the plughole
- Scuffs and scratches in the surface
- Chips on the rim or sides
- Impact holes in acrylic
Before booking anyone
- How the room is protected while they work
- How to care for the finish
- How changes to the job are handled
- Who turns up on the day
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours. If we find something your pictures didn’t show, we will explain it before carrying on.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Tell us about parking, stairs or access
- Ensure the room can be ventilated
- Let us know which floor the room is on
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Blythe Bridge and nearby
Blythe Bridge is about 3 miles south-west of Cheadle, in Staffordshire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Blythe Bridge is one of 512 places in Staffordshire we cover. You can also see our page for Birmingham, about 35 miles away.
We work across ST11. You will find streets such as Blithe View, Beechwood Close and Barlstone Avenue, all of which we cover. Other places close to Blythe Bridge include Forsbrook (1 mile north-east), Draycott in the Moors (1 mile east), Stallington (1 mile south-west), Saverley Green (1 mile south) and Cresswell (1 mile south-east). Larger places within reach include Stafford (11 miles south), Newcastle-under-Lyme (8 miles north-west), Longton (3 miles north-west), Rugeley (15 miles south), Stone (6 miles south-west) and Leek (10 miles north).
What’s near Blythe Bridge
Our customers here include homes close to Blythe Bridge High School, The William Amory Primary School and The Black Cock pub and the streets around them. There is a railway station in Blythe Bridge itself: Blythe Bridge station. A little further out are Cheadle Hospital (3.3 miles north-east) and Beswick Museum (2 miles west). The countryside around Blythe Bridge includes Hem Heath Woods.
Repair or replace in Blythe Bridge?
Replacing a bath rarely stops at the bath: tiles along the rim typically crack when it comes out, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. Repairing the damage avoids all of that. Prices start from £95. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why book with us
- We come to you, anywhere in the UK
- We leave the room as we found it
- No need to remove anything
- Colour mixed on the day to match
Read our full price list and guide to resurfacing and replacement costs.
When we would advise against a repair
In fairness, some problems need a different fix:
- Leaking fittings, which need a plumber
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
Towns and villages near Blythe Bridge
More services for Blythe Bridge
What bath repair costs
Prices start from £95. You will know the full cost before booking. We look at:
- The material
- Whether we combine several jobs
- The type of damage
- How easy the damage is to reach
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
You can normally get a fixed quote without us visiting. To make it quick:
- One picture of the entire bath
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
Blythe Bridge questions
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Do you come to Blythe Bridge?
We do. We send a technician to Blythe Bridge for every job, with no extra charge for travel.
How invisible is a bath repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Landlords, agents and businesses in Blythe Bridge
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
