Staffordshire · England

Bath Repair in Draycott in the Moors

Bath repair for Draycott in the Moors, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Repairs from £95
  • A failed DIY repair that’s discoloured or lifting
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Draycott in the Moors

Bath repair in Draycott in the Moors, done in place

A typical bath repair is a few hours’ work, and the bath is back in use the day after. You won’t need a plumber or tiler, because the bath does not move. Our technicians work on acrylic, whirlpool & spa baths and cast iron enamel, and common reasons people contact us are snagging damage from a refit and damage beneath the taps.

All of our repairs are guaranteed for twelve months in Draycott in the Moors and everywhere else. We return to put right any problem with the work.

Location
Draycott in the Moors (ST11)
County
Staffordshire
Cover
12 months on all our work
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Common problems we fix in Draycott in the Moors

Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.

If you can see any of these, send us a photo:

  • A chip where the taps sit
  • Rusty patches near the plughole
  • Chips caused by builders
  • A chipped rim or side

Questions to ask before you book

  • What happens if they find more damage
  • Whether a trained technician does the job
  • Whether they match the colour on site
  • Whether cleaning and preparation are in the price

Our hiring checklist

Our work in Draycott in the Moors

Draycott in the Moors is about 3 miles south-west of Cheadle, in Staffordshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We cover 512 places in Staffordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 34 miles away.

Our visits in ST11 are booked in the same way as anywhere else. Jobs here include addresses on Uttoxeter Road, Draycott Old Road and New Avenue. We also travel to Cresswell (1 mile south), Forsbrook (1 mile north-west), Blythe Bridge (1 mile west), Totmonslow (1 mile east) and Saverley Green (1 mile south-west). We also work in nearby towns such as Stafford (11 miles south), Newcastle-under-Lyme (9 miles north-west), Longton (4 miles north-west), Rugeley (15 miles south), Stone (6 miles south-west) and Leek (10 miles north).

Near you in Draycott in the Moors

Our customers here include homes close to The William Amory Primary School, The Izaak Walton pub and Church of St Margaret and the streets around them. The closest station to Draycott in the Moors is Blythe Bridge station, about 1.3 miles west. Well-known places in the area include Cheadle Hospital (2.5 miles north-east) and Beswick Museum (3 miles west).

Map of Draycott in the Moors © OpenStreetMap contributors

Should I try a DIY kit first?

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

Landlord and trade work in Draycott in the Moors

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.

What affects the price in Draycott in the Moors

Repairs from £95. There is no area surcharge for Draycott in the Moors. The price reflects:

  • The colour and finish to match
  • How many items we do on one visit
  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off

There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Quotes from your photos

Almost every job we do is priced from pictures. This is what to send:

  • The material, if you know it
  • A coin beside the damage so we can judge size
  • A wider photo showing the whole bath
  • A clear, close picture of the problem area

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.

Looking after it afterwards

Simple care helps the repair last. We recommend:

  • Get a dripping tap fixed promptly
  • Keep metal cans and razors off the surface
  • Avoid scourers, wire wool and gritty cream cleaners
  • Put a towel in the bath if you are working above it

In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.

How it works

We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes two to three hours for most chips in most cases. We leave the room clean and you’ll know when it can be used.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the next day.

How to prepare

  • Tell us if there are stairs or a lift
  • Keep a parking space free if you can
  • Plan for the room to be out of bounds to pets and children

Get a quote

Most customers in Draycott in the Moors get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Read more

FAQs for Draycott in the Moors

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

Is repairing better than replacing?

Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Can a cracked acrylic bath be fixed?

Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

I tried a repair kit. Can you fix it?

Yes. We take out the old repair and do it properly. Mention it when you send pictures.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Staffordshire.

Can you redo someone else’s repair?

Usually, yes. We remove the old repair before doing a new one.

Materials and what they mean for the repair

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

When a repair is not the answer

We would rather lose a job than do one that will not last, so here’s what a repair can’t put right:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • A bath that moves underfoot, until its support is fixed
  • Acrylic cracks with no access behind them

Send us photos and we will tell you honestly.

Surfaces we repair

  • Pressed steel enamel
  • Acrylic
  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.