Buckinghamshire · England
Bath chip & crack repair in Bolter End, Buckinghamshire
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Bolter End. Send pictures for a free, fixed quote.
- Repairs from £95
- Chips on the rim or sides
- A hole punched through by something heavy
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. A repair deals only with the damage in a single visit. Repairs from £95, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why Bolter End clients choose us
- No need to remove anything
- One price list for the entire UK
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
Take a look at our pricing or guide to resurfacing and replacement costs.
Bath repair at your home in Bolter End
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and people most frequently call us about impact holes in acrylic and chips under the taps.
Every repair comes with a one-year guarantee, wherever you are in Buckinghamshire.
- Where
- Bolter End (HP14)
- Region
- Buckinghamshire
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
We agree an arrival time beforehand. On site, it takes two to three hours for most chips. The room is left tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Make sure the area is dry
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
Related advice
Covering Bolter End
Bolter End is about 4 miles west of High Wycombe, in Buckinghamshire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Bolter End is one of 263 towns and villages in Buckinghamshire where we work. Our jobs stretch from Bolter End to London (33 miles away).
Our technicians cover all of HP14. Whether you live on Bolter End Lane, New Road and Finings Road or a nearby road, we can come to you. If you are just outside Bolter End, we cover Wheeler End (1 mile north-east), Cadmore End (1 mile west), Lane End (1 mile south-east), Piddington (1 mile north-east) and Little Frieth (1 mile south). Within a short drive, we also cover Aylesbury (13 miles north), High Wycombe (4 miles east), Chesham (12 miles north-east), Marlow (5 miles south-east), Amersham (11 miles east) and Beaconsfield (9 miles east).
Local landmarks in Bolter End
Typical jobs here are in homes near The Peacock pub, Church of the Holy Trinity and Lane End Primary School. The closest station to Bolter End is Saunderton station, roughly 3.6 miles north of the centre. Further afield, we also cover the area around High Wycombe Castle (4.3 miles east) and Eden (4 miles east). Open spaces near Bolter End include Yoesden and Bald Hill.
- Other local spots include West Wycombe Rural (1.7 miles north-east)
FAQs for Bolter End
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Buckinghamshire.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can pets and children be at home?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will I be able to see the repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Can you repair a failed DIY repair?
Yes. We take out the old repair and do it properly. Tell us about it when you send pictures.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Common problems we fix in Bolter End
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Most people contact us after spotting one of these:
- A cracked acrylic bath
- Rust spots around the plughole
- A chipped rim or side
- Holes from dropped items
Questions to ask before you book
- Whether the colour is mixed to match
- How soon you can use it again
- What protection goes down before work starts
- The length of the guarantee and what it covers
Different materials, different repairs
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Nearby places to Bolter End
What else we do in Bolter End
When a repair isn’t the answer
It helps to know what we can’t do:
- Rust that has eaten right through a steel bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Landlords, agents and businesses in Bolter End
We work for landlords, letting agents and housing providers in Bolter End as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What bath repair costs
Prices start from £95. We don’t charge extra for travel to Bolter End. The price depends on:
- What kind of damage it is
- Doing more than one item at once
- How easy the damage is to reach
- How hard the colour is to match
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
Two or three clear photos are generally enough. Try to include:
- Something in shot to show the size
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
To get a price, send a couple of pictures using our quote form or call us. We will say right away whether it can be repaired.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
